- HOME
- POLYMER SEARCH
- Polymer Property : Tensile Strength, Ultimate = 31.0 MPa
Polymer Property : Tensile Strength, Ultimate = 31.0 MPa Product List
Mechanical PropertiesTips: 30 items are displayed at most. For the rest of the results, please contact customer service.
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Ultimate | 31.0 MPa | 4500 psi | ASTM D638-95 |
| Multibase Multi-Pro® 4005 M I Medium Impact 40% Filler Content Polypropylene Multi-Pro 4005 M I is a chemically coupled reinforced polypropylene compound featuring high flex modulus and high impact under retention of the heat resistance properties. The product is designed f.. |
|||
| Tensile Strength, Ultimate | 31.0 MPa | 4500 psi | ASTM Data |
| Americas Styrenics Styron® 495R High Impact Polystyrene
(discontinued **) Data provided by Dow Chemical.Americas Styrenics was formed in 2008 as a joint venture between Dow Chemical and Chevron Phillips Chemical Company. Styron was a Dow trade name before the JV formatio.. |
|||
| Tensile Strength, Ultimate | 31.0 MPa | 4500 psi | ASTM D638 |
| Chevron Phillips HiD® 9300 HDPE Orange Pipe Resin
(discontinued **) Resin Type: Linear Copolymer; PE2406 Pipe Resin; ASTM D 3350 Classification: 234363E; ASTM D 4976 Classification: PE 225, A 56607Characteristics: PPI Recommended Hydrostatic Design Bases (HDB): 1250.. |
|||
| Tensile Strength, Ultimate | 31.0 MPa | 4500 psi | Type 1 - Rigids, 0.2 in/min; ASTM D638 |
| PolyOne Edgetek® AS-20GB/000 Acrylonitrile Butadiene Styrene (ABS), Glass Bead Filled
(discontinued **) Description/Features:Glass Bead FilledPolyOne First ChoiceInformation provided by PolyOne Corporation. |
|||
| Tensile Strength, Ultimate | 31.0 MPa | 4500 psi | ASTM D638 |
| Chevron Phillips HiD® 9642 HDPE Sheeting Resin
(discontinued **) Resin Type: Sheeting Resin for the Geomembrane Market; ASTM D 4976 Classification: PE 225, A 56507Applications:Blown Geomembrane Applications, Sanitary Landfill Liners, Waste Water Reservoir Contain.. |
|||
| Tensile Strength, Ultimate | 31.0 MPa | 4500 psi | ASTM D638 |
| NOVA Chemicals Novapol® HD-2100-A MDPE Extrusion Resin
(discontinued **) Features: Excellent ESCR and toughness, high strength, excellent processability.Applications: pipe, water pipe, fuel gas pipe, re-lining pipe, steel pipe coating.Data provided by the manufacturer. |
|||
| Tensile Strength, Ultimate | 31.0 MPa | 4500 psi | Type 1 - Rigids, 0.2 in/min; ASTM D638 |
| PolyOne Edgetek® PE-10GF/000 High Density Polyethylene (HDPE), Glass Filled
(discontinued **) Description/Features:Glass Fiber ReinforcedPolyOne First ChoiceInformation provided by PolyOne Corporation. |
|||
| Tensile Strength, Ultimate | 31.0 - 42.1 MPa | 4500 - 6100 psi | Average value: 36.9 MPa Grade Count:7 |
| Overview of materials for Polychlorotrifluoroethylene; Molded This property data is a summary of similar materials in the MatWeb database for the category "Polychlorotrifluoroethylene; Molded". Each property range of values reported is minimum and maximum valu.. |
|||
| Tensile Strength, Ultimate | 31.0 - 210 MPa | 4500 - 30500 psi | Average value: 161 MPa Grade Count:23 |
| Overview of materials for Nylon 12, 50% Glass Fiber Filled This property data is a summary of similar materials in the MatWeb database for the category "Nylon 12, 50% Glass Fiber Filled". Specific grades with glass content between 45% and 54% are included. .. |
|||
| Tensile Strength, Ultimate | 31.0 MPa | 4500 psi | 2 in/min; ASTM D638 |
| Ineos K38-20-188 HDPE K38-20-188 is a natural, UV stabilized, medium density polyethylene resin designed specifically for use with an approved Ineos North America yellow masterbatch to produce pipe or tubing for natural .. |
|||
| Tensile Strength, Ultimate | 31.0 MPa | 4500 psi | ASTM D638 |
| Ineos K44-08-123 HDPE Copolymer with Carbon Black Fortiflex® K44-08-123 is a black high density polyethylene copolymer designed specifically for extrusion of potable water, industrial, and mining pipe. It has NSF certification and is recognized.. |
|||
| Tensile Strength, Ultimate | 31.0 MPa | 4490 psi | 150°C, 40 min., Pressure Vulcanization. -4% Change after 100°C, 70 hrs, Oil Immersion |
| KKPC KOSYN KNB 35H Acrylonitrile Butadiene Rubber (NBR) Acrylonitrile Butadiene Rubber (NBR)Characteristics: KOSYN KNB is copolymer of high oil resistance and chemical resistance made from acrylonitrile and butadiene by the cold emulsion polymerization. .. |
|||
| Tensile Strength, Ultimate | 31.0 MPa @Temperature 22.0 °C |
4500 psi @Temperature 71.6 °F |
25mm flat samples, compression moulded; ISO 527-4 |
| Menzolit Menzolit® BMC 0300 Unsaturated Polyester UP BMC 0300 is a low shrink standard material for general-purpose applications, which require a higher level on surface quality and better dimensional stability. The glass content is on a level that co.. |
|||
| Tensile Strength, Ultimate | 31.0 MPa | 4500 psi | ASTM Data |
| Styron Magnum™ 9030 ABS, High Gloss MAGNUM® ABS resins are thermoplastic materials which provide an excellent balance of processability, impact resistance and heat resistance as imparted by the various polymer compositions. MAGNUM .. |
|||
| Tensile Strength, Ultimate | 31.0 MPa | 4500 psi | at max load; ASTM D638 |
| A. Schulman POLYPUR™ FPU 1103F Thermoplastic Polyurethane Compound Information provided by A. Schulman. |
|||
| Tensile Strength, Ultimate | 31.0 MPa | 4500 psi | DIN 53504 |
| Lubrizol ESTANE® 58630 Ether Based Thermoplastic Polyurethane (European Grade) Description: Estane® thermoplastic polyurethanes (TPUs) include elastomeric materials that bridge the gap between flexible rubber and rigid plastics. These materials offer toughness and durability .. |
|||
| Tensile Strength, Ultimate | 31.0 MPa | 4500 psi | ASTM D638 |
| Plenco 5350 Phenolic, Granular, Compression Molded PLENCO 05350 is a mineral and graphite filled phenolic molding compound, developed for seal applications. PLENCO 05350 offers excellent dimensional stability, lubricity, and low abrasion properties... |
|||
| Tensile Strength, Ultimate | 31.0 MPa | 4500 psi | at max load; ASTM D638 |
| A. Schulman POLYPUR™ FPU 1103F Thermoplastic Polyurethane Compound Information provided by A. Schulman. |
|||
| Tensile Strength, Ultimate | 31.0 MPa | 4500 psi | ASTM D638 |
| Eastman Tenite Propionate 380A2R30015 Natural, Trsp Cellulose Acetate Propionate Plasticizer 15%. Weight loss on heating = 0.7% per ASTM D 707. Soluble matter loss = 0.1% per ASTM D 570.Product Description: TENITE cellulosic plastics are noted for their excellent balance of p.. |
|||
| Tensile Strength, Ultimate | 31.0 MPa | 4500 psi | ASTM D638 |
| CPC - Vycom HITEC® HDPE High Density Polyethylene Hitec HDPE is a high impact, high density polyethylene sheet. It is ideally suited for the manufacture of chemical resistant products which come in direct contact with foodstuffs. Hitec meets the st.. |
|||
| Tensile Strength, Ultimate | 31.0 MPa | 4500 psi | after optimum cure |
| Armstrong X-6/E Epoxy Adhesive Thixotropic.Information provided by Ellsworth Adhesives. |
|||
| Tensile Strength, Ultimate | 31.0 MPa | 4500 psi | XY; ASTM D638 |
| ALM PA-616-GS Filled Nylon 12 Prototyping Polymer 50% glass sphere filled material for improved dimensional stability, increased stiffness, and higher temperature applications when compared to unfilled PA.The PA 616-GS can be processed on any laser.. |
|||
| Tensile Strength, Ultimate | 31.0 MPa | 4500 psi | |
| BCC Products BC 7062-3H Epoxy Casting BC 7062 are aluminum filled, low viscosity epoxy mass casting resins. These room temperature cure systems allow the user choice thicknesses of 1/8 inch to a maximum of 6 inches without foaming or yi.. |
|||
| Tensile Strength, Ultimate | 31.0 MPa | 4500 psi | ASTM D638-95 |
| Multibase Multi-ABS 3525 Clear Data provided by Multibase. |
|||
| Tensile Strength, Ultimate | 31.0 MPa | 4500 psi | XY; ASTM D638 |
| ALM PA-615-GS Filled Nylon 12 Prototyping Polymer 50% glass sphere filled material for improved dimensional stability, increased stiffness, and higher temperature applications when compared to unfilled PA.Drop-in replacement for other commercially .. |
|||
| Tensile Strength, Ultimate | 31.0 MPa | 4500 psi | 2 in/min, at max load; ASTM D638 |
| A. Schulman POLYPUR™ FPU 1152C Thermoplastic Polyurethane Information provided by A. Schulman. |
|||
| Tensile Strength, Ultimate | 31.0 MPa | 4500 psi | TM R050-36 |
| Resinlab® EP965LVLX Clear Unfilled Electronic Grade Epoxy Encapsulant Resinlab™ EP965LVLX Clear is a two part unfilled electronic grade epoxy encapsulant designed for small to medium sized castings. It cures at room temperature to a tough, semi-rigid polymer. It has .. |
|||
| Tensile Strength, Ultimate | 31.0 MPa | 4500 psi | ASTM D412-80 |
| DuPont Performance Polymers Hypalon® 4085 Chlorosulfonated Polyethylene Rubber, Gum Compound
(discontinued ** Gum compound with 100 parts Hypalon; 4 parts high activity magnesia; 3 parts pentaerythritol; and 2 parts Tetrone® A rubber accelerator (from DuPont Dow Elastomers). Reinforcing fillers not needed.. |
|||
| Tensile Strength, Ultimate | 31.0 MPa | 4500 psi | ASTM D638 |
| Adell RQ-18 Copolymer Polypropylene, 40% Mica Reinforced Data provided by Adell Plastics, Inc. |
|||
Copyright © lookpolymers.com All Rights Reserved