POLYMER SEARCH

Styron CALIBREâ„¢ 301V-6 Polycarbonate Resin

Category	Polymer , Thermoplastic , Polycarbonate (PC)
Manufacturer	Styron
Trade Name	CALIBRE™
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Styron CALIBREâ„¢ 301V-6 Polycarbonate Resin.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Overview: CALIBREâ„¢ 301V-6 Polycarbonate resins offer exceptional impact resistance and heat distortion resistance, and meets UL94 V-2 rating. CALIBRE 301V-6 contains a mold release agent and is available in opaque colors.Govt. and Industry Standards: CSA (Canadian Standards Association)Underwriters Laboratory Inc. (UL) Applications:Electronic componentsAutomotiveLightingStorage Media HousingsInformation provided by Styron

Physical Properties	Metric	English	Comments
Density	1.20 g/cc	0.0434 lb/inÂ³	ISO 1183/A; ASTM D792
Water Absorption	0.25 % @Temperature 23.0 Â°C	0.25 % @Temperature 73.4 Â°F	Equilibrium, 50% RH; ISO 62; ASTM D570
	0.15 % @Temperature 23.0 Â°C, Time 86400 sec	0.15 % @Temperature 73.4 Â°F, Time 24.0 hour	ISO 62; ASTM D570
Linear Mold Shrinkage, Flow	0.0050 - 0.0070 cm/cm	0.0050 - 0.0070 in/in	ISO 294-4; ASTM D955
Melt Flow	6.0 g/10 min @Load 1.20 kg, Temperature 300 Â°C	6.0 g/10 min @Load 2.65 lb, Temperature 572 Â°F	ASTM D1238; ISO 1133

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell M	73	73	ASTM D785
Hardness, Rockwell R	118	118	ASTM D785
Tensile Strength at Break	72.0 MPa	10400 psi	ISO 527-2/50
	72.4 MPa	10500 psi	50 mm/min; ASTM D638
Tensile Strength, Yield	60.0 MPa	8700 psi	50 mm/min; ASTM D638
Elongation at Break	150 %	150 %	50 mm/min; ASTM D638
Elongation at Yield	6.0 %	6.0 %	50 mm/min; ISO 527-2/50; ASTM D638
Tensile Modulus	2.41 GPa	350 ksi	50 mm/min; ISO 527-2/50; ASTM D638
Flexural Strength	96.0 MPa	13900 psi	3-point; ISO 178
	96.5 MPa	14000 psi	Method I (3 point load), 2.0 mm/min; ASTM D790
Flexural Modulus	2.41 GPa	350 ksi	Method I (3 point load), 2.0 mm/min; ISO 178; ASTM D790
Izod Impact, Notched	9.10 J/cm @Temperature 23.0 Â°C	17.0 ft-lb/in @Temperature 73.4 Â°F	ASTM D256
Izod Impact, Notched (ISO)	88.0 kJ/mÂ² @Temperature 23.0 Â°C	41.9 ft-lb/inÂ² @Temperature 73.4 Â°F	ISO 180/A
Izod Impact, Unnotched (ISO)	NB @Temperature 23.0 Â°C	NB @Temperature 73.4 Â°F	ASTM D256; ISO 180
Tensile Impact Strength	588 kJ/mÂ²	280 ft-lb/inÂ²	ASTM D1822
Dart Drop, Total Energy	90.4 J	66.7 ft-lb	3.39 m/sec; ASTM D3763
Abrasion	45	45	[%] Taber; ASTM D1044

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	68.0 Âµm/m-Â°C @Temperature -40.0 - 82.0 Â°C	37.8 Âµin/in-Â°F @Temperature -40.0 - 180 Â°F	ASTM D696
Deflection Temperature at 0.46 MPa (66 psi)	142 Â°C	288 Â°F	Annealed; ISO 75-2/B; ASTM D648
Deflection Temperature at 1.8 MPa (264 psi)	122 Â°C	252 Â°F	Unannealed; ISO 75-2/B; ASTM D648
	139 Â°C	282 Â°F	Annealed; ISO 75-2/B; ASTM D648
Vicat Softening Point	148 Â°C @Load 5.10 kg	298 Â°F @Load 11.2 lb	Rate A (50Â°C/h); ISO 306/B50; ASTM D1525
Flammability, UL94	V-2 @Thickness 1.60 mm	V-2 @Thickness 0.0630 in
	V-2 @Thickness 3.20 mm	V-2 @Thickness 0.126 in
Oxygen Index	26 %	26 %	ISO 4289-2

Electrical Properties	Metric	English	Comments
Volume Resistivity	2.00e+17 ohm-cm	2.00e+17 ohm-cm	ASTM D257
Dielectric Constant	3.0 @Frequency 60.0 Hz	3.0 @Frequency 60.0 Hz	ASTM D150
	3.0 @Frequency 1.00e+6 Hz	3.0 @Frequency 1.00e+6 Hz	ASTM D150
Dielectric Strength	17.0 kV/mm	432 kV/in	ASTM D149
	17.0 kV/mm	432 kV/in	IEC 60243-1
Dissipation Factor	0.0010 @Frequency 50.0 Hz	0.0010 @Frequency 50.0 Hz	ASTM D150
	0.0020 @Frequency 1.00e+6 Hz	0.0020 @Frequency 1.00e+6 Hz	ASTM D150

Descriptive Properties	Value	Comments
Average Extent of Burring	3 cm	ASTM D635

Users viewing this material also viewed the following: