Styron CALIBREâ„¢ 300 10 Polycarbonate, General Purpose

Category	Polymer , Thermoplastic , Polycarbonate (PC) , Polycarbonate, Unreinforced, Flame Retardant
Manufacturer	Styron
Trade Name	CALIBRE™
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Styron CALIBREâ„¢ 300 10 Polycarbonate, General Purpose.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

CALIBREÂ® 300 series are general purpose, UL listed polycarbonate resins. CALIBRE 300 series resins exhibit an excellent physical property balance of heat resistance, transparency and impact strength. The CALIBRE 300 series can be supplied with a mold release package, a UV stabilizer package or both.The CALIBRE 300 series resins are typically used for appliances, storage media housings, extruded sheet, electrical components and lighting.Available Melt Flow Rates: 4, 6, 10, 15.Associated products: CALIBRE 300: without a mold release and UV stabilization package CALIBRE 301: including a mold release package CALIBRE 302: including a UV stabilizer package CALIBRE 303: including a mold release and UV stabilizer package.Data provided by Dow Chemical.This product line was spun off from Dow Chemical to Styron in 2010.

Physical Properties	Metric	English	Comments
Density	1.20 g/cc	0.0434 lb/inÂ³	ASTM Data
Melt Density	1.01 g/cc	0.0365 lb/inÂ³	Melt density
Water Absorption	0.15 %	0.15 %
Moisture Absorption at Equilibrium	0.32 %	0.32 %	Humidity Absorption
Linear Mold Shrinkage	0.0060 cm/cm	0.0060 in/in
Melt Flow	10 g/10 min @Load 1.20 kg, Temperature 300 Â°C	10 g/10 min @Load 2.65 lb, Temperature 572 Â°F	ASTM Data

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell R	118	118
Tensile Strength, Ultimate	71.0 MPa	10300 psi	ASTM Data
Tensile Strength, Yield	62.1 MPa	9010 psi	ASTM Data
Elongation at Break	150 %	150 %	ASTM Data
Elongation at Yield	6.0 %	6.0 %	ISO Data
Tensile Modulus	2.41 GPa	350 ksi	ASTM Data
Izod Impact, Notched	9.07 J/cm	17.0 ft-lb/in	ASTM Data
Izod Impact, Unnotched	NB	NB	ASTM Data
Charpy Impact Unnotched	NB	NB	ISO Data
	NB	NB	ISO Data, Low Temp
Charpy Impact, Notched	1.30 J/cmÂ²	6.19 ft-lb/inÂ²	ISO Data, Low Temp
	9.00 J/cmÂ²	42.8 ft-lb/inÂ²	ISO Data
Tensile Impact Strength	526 kJ/mÂ²	250 ft-lb/inÂ²	ASTM Data
Impact Test	87.0 J @Temperature 23.0 Â°C	64.2 ft-lb @Temperature 73.4 Â°F	Instrumented Dart Total Energy

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	68.4 Âµm/m-Â°C @Temperature 20.0 Â°C	38.0 Âµin/in-Â°F @Temperature 68.0 Â°F	ASTM data
Specific Heat Capacity	1.87 J/g-Â°C	0.447 BTU/lb-Â°F
Thermal Conductivity	0.184 W/m-K	1.28 BTU-in/hr-ftÂ²-Â°F
Deflection Temperature at 1.8 MPa (264 psi)	128 Â°C	262 Â°F	Unannealed; ASTM Data
Vicat Softening Point	156 Â°C	313 Â°F
Flammability, UL94	V-2 @Thickness 3.20 mm	V-2 @Thickness 0.126 in
Oxygen Index	26 %	26 %

Optical Properties	Metric	English	Comments
Haze	1.1 %	1.1 %
Transmission, Visible	89 %	89 %

Electrical Properties	Metric	English	Comments
Electrical Resistivity	2.00e+17 ohm-cm	2.00e+17 ohm-cm	ASTM Data
Dielectric Constant	2.93 @Frequency 60 Hz	2.93 @Frequency 60 Hz	ASTM Data
	2.93 @Frequency 1e+6 Hz	2.93 @Frequency 1e+6 Hz	ASTM Data
Dielectric Strength	16.5 kV/mm	419 kV/in
Dissipation Factor	0.00050 @Frequency 60 Hz	0.00050 @Frequency 60 Hz
	0.0017 @Frequency 1e+6 Hz	0.0017 @Frequency 1e+6 Hz	ASTM Data

Users viewing this material also viewed the following: