- HOME
- POLYMER SEARCH
- Thermoplastic
- ABS Polymer
- Acrylonitrile Butadiene Styrene (ABS), Transparent, Molded
- Styrolution Terlux® 2812 HD MABS
Styrolution Terlux® 2812 HD MABS
| Category | Polymer , Thermoplastic , ABS Polymer , Acrylonitrile Butadiene Styrene (ABS), Transparent, Molded |
| Manufacturer | Styrolution |
| Trade Name | Terlux® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Styrolution Terlux® 2812 HD MABS.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Description: Terlux 2812 HD is a suitable grade for the food packaging and health care and diagnostic markets.Information provided by STYROLUTION, which is a joint venture between BASF and INEOS
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.08 g/cc | 0.0390 lb/in³ | ISO 1183 |
| Moisture Absorption at Equilibrium | 0.35 % | 0.35 % | 50% RH; ISO 62 |
| 0.70 % | 0.70 % | Saturation; ISO 62 | |
| Linear Mold Shrinkage, Flow | 0.0055 cm/cm | 0.0055 in/in | ISO 294-4 |
| Melt Flow | 8.64 g/10 min @Load 10.0 kg, Temperature 220 °C |
8.64 g/10 min @Load 22.0 lb, Temperature 428 °F |
ISO 1133 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Ball Indentation Hardness | 75.0 MPa @Load 36.5 kg, Time 30.0 sec |
10900 psi @Load 80.5 lb, Time 0.00833 hour |
ISO 2039-1 |
| Tensile Strength, Yield | 42.0 MPa | 6090 psi | ISO 527-1/-2 |
| Elongation at Break | 20 % | 20 % | Nominal; ISO 527 |
| Elongation at Yield | 4.0 % | 4.0 % | ISO 52 |
| Tensile Modulus | 1.90 GPa | 276 ksi | ISO 527 |
| Charpy Impact Unnotched | 8.00 J/cm² @Temperature -30.0 °C |
38.1 ft-lb/in² @Temperature -22.0 °F |
ISO 179 |
| 12.0 J/cm² @Temperature 23.0 °C |
57.1 ft-lb/in² @Temperature 73.4 °F |
ISO 179 | |
| Charpy Impact, Notched | 0.200 J/cm² @Temperature -30.0 °C |
0.952 ft-lb/in² @Temperature -22.0 °F |
ISO 179 |
| 0.500 J/cm² @Temperature 23.0 °C |
2.38 ft-lb/in² @Temperature 73.4 °F |
ISO 179 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear, Parallel to Flow | 95.0 µm/m-°C | 52.8 µin/in-°F | |
| Deflection Temperature at 1.8 MPa (264 psi) | 90.0 °C | 194 °F | ISO 75 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | >= 1.00e+13 ohm-cm | >= 1.00e+13 ohm-cm | IEC 60093 |
| Surface Resistance | 1.00e+15 ohm | 1.00e+15 ohm | IEC 60093 |
| Dielectric Constant | 2.8 @Frequency 1.00e+6 Hz |
2.8 @Frequency 1.00e+6 Hz |
IEC 60250 |
| 3.0 @Frequency 100 Hz |
3.0 @Frequency 100 Hz |
IEC 60250 | |
| Dielectric Strength | 37.0 kV/mm | 940 kV/in | K20/P50; IEC 60243-1 |
| Dissipation Factor | 0.013 @Frequency 1.00e+6 Hz |
0.013 @Frequency 1.00e+6 Hz |
IEC 60250 |
| 0.016 @Frequency 100 Hz |
0.016 @Frequency 100 Hz |
IEC 60250 |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Commercial Status | North America |
Users viewing this material also viewed the following:
- Plastcom SLOVALEN PC 51 GF 10 PP, 10% glass fibre
- Nye Lubricants 605G (SO) Synthetic Oil
- Osprey Metals 304L/MA Master Alloy Stainless Steel Powder (Grade 80% - 22)
- Network Polymers PC-1004
- Solvay IGEPAL® CO 970 Surfactant
- Hippe PF WV 303 Wood veneer Reinforced Phenolic Resin - Sheet
- Axiall ProTherm® 4353 Rigid PVC, Extrusion
- PolyOne Edgetek® UR-20GF/000 Natural Thermoplastic Polyurethane (Ether-Based), 20% Glass Fiber Reinforced (di
- Lanxess Pocan® BFN 4231 000000 PBT, 25% Glass Fiber
Copyright © lookpolymers.com All Rights Reserved