- HOME
- POLYMER SEARCH
- Thermoplastic
- Poly (P-Xylylene)
- Specialty Coating Systems Parylene N Poly (P-Xylylene) Coating
Specialty Coating Systems Parylene N Poly (P-Xylylene) Coating
| Category | Polymer , Film , Thermoplastic , Poly (P-Xylylene) |
| Manufacturer | Specialty Coating Systems (SCS) |
| Trade Name | Parylene |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Specialty Coating Systems Parylene N Poly (P-Xylylene) Coating.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Parylene N, poly(para-xylylene), is a completely linear, highly crystalline material. Parylene N is a primary dielectric, exhibiting a very low dissipation factor, high dielectric strength, and a low dielectric constant invariant with frequency. The crevice-penetrating ability of Parylene N is second only to that of Parylene HT®.SCS Parylene conformal coatings are ultra-thin, pinhole-free polymer coatings that provide a number of high-value surface treatment properties such as excellent moisture, chemical and dielectric barrier properties, thermal and UV stability, and dry-film lubricity. Parylene coatings are used in a number of applications throughout the medical device, electronics, automotive, military and aerospace industries.Information provided by Specialty Coating Systems (SCS) .
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Water Vapor Permeability | 0.590 g mil/ (m2 day) @Temperature 37.0 °C |
0.0381 g mil/ (100 in2 day) @Temperature 98.6 °F |
90% RH; ASTM E96 |
| Density | 1.10 - 1.12 g/cc | 0.0397 - 0.0405 lb/in³ | ASTM D1505 |
| Water Absorption | <= 0.10 % @Time 86400 sec |
<= 0.10 % @Time 24.0 hour |
ASTM D570 |
| Oxygen Transmission | 15.4 cc-mm/m²-24hr-atm @Temperature 25.0 °C |
39.1 cc-mil/100 in²-24hr-atm @Temperature 77.0 °F |
ASTM D1434 |
| Nitrogen Transmission | 3.00 cc-mm/m²-24hr-atm @Temperature 25.0 °C |
7.62 cc-mil/100 in²-24hr-atm @Temperature 77.0 °F |
ASTM D1434 |
| Carbon Dioxide Transmission | 84.3 cc-mm/m²-24hr-atm @Temperature 25.0 °C |
214 cc-mil/100 in²-24hr-atm @Temperature 77.0 °F |
ASTM D1434 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell R | 85 | 85 | ASTM D785 |
| Tensile Strength | 48.3 MPa | 7000 psi | |
| Tensile Strength, Yield | 42.1 MPa | 6100 psi | ASTM D882 |
| Elongation at Break | <= 250 % | <= 250 % | ASTM D882 |
| Elongation at Yield | 2.5 % | 2.5 % | ASTM D882 |
| Modulus of Elasticity | 2.41 GPa | 350 ksi | Secant; ASTM D882 |
| Coefficient of Friction, Dynamic | 0.25 | 0.25 | ASTM D1894 |
| Coefficient of Friction, Static | 0.25 | 0.25 | ASTM D1894 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 69.0 µm/m-°C | 38.3 µin/in-°F | via TMA |
| Specific Heat Capacity | 0.837 J/g-°C | 0.200 BTU/lb-°F | |
| Thermal Conductivity | 0.126 W/m-K | 0.874 BTU-in/hr-ft²-°F | ASTM C177 |
| Melting Point | 420 °C | 788 °F | via DSC |
| Maximum Service Temperature, Air | 60.0 °C | 140 °F | Continuous |
| 80.0 °C | 176 °F | Short Term | |
| Softening Point | 160 °C | 320 °F | T5 Point - modulus = 690 MPa (100,000 psi) |
| >= 300 °C | >= 572 °F | T4 point - modulus = 70 MPa (10,000 psi) |
| Optical Properties | Metric | English | Comments |
|---|---|---|---|
| Refractive Index | 1.661 | 1.661 | n<sub>D</sub>; Abbe Refractometer |
| Transmission, Visible | 80 % @Wavelength 400 nm |
80 % @Wavelength 400 nm |
|
| UV Transmittance | <= 1.0 % @Wavelength 277 nm |
<= 1.0 % @Wavelength 277 nm |
cutoff |
| 60 % @Wavelength 300 nm |
60 % @Wavelength 300 nm |
||
| 75 % @Wavelength 350 nm |
75 % @Wavelength 350 nm |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.40e+17 ohm-cm | 1.40e+17 ohm-cm | 50% RH; ASTM D257 |
| Surface Resistance | 1.00e+13 ohm | 1.00e+13 ohm | 50% RH; ASTM D257 |
| Dielectric Constant | 2.65 @Frequency 60.0 Hz |
2.65 @Frequency 60.0 Hz |
ASTM D150 |
| 2.65 @Frequency 1000 Hz |
2.65 @Frequency 1000 Hz |
ASTM D150 | |
| 2.65 @Frequency 1.00e+6 Hz |
2.65 @Frequency 1.00e+6 Hz |
ASTM D150 | |
| Dielectric Strength | 276 kV/mm | 7000 kV/in | ASTM D149 |
| Dissipation Factor | 0.00020 @Frequency 60.0 Hz |
0.00020 @Frequency 60.0 Hz |
ASTM D150 |
| 0.00020 @Frequency 1000 Hz |
0.00020 @Frequency 1000 Hz |
ASTM D150 | |
| 0.00060 @Frequency 1.00e+6 Hz |
0.00060 @Frequency 1.00e+6 Hz |
ASTM D150 |
| Compliance Properties | Metric | English | Comments |
|---|---|---|---|
| USP Class VI | Yes | Yes |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Biocompatibility | ISO 10993 | |
| Hydrogen Transmission | 212.6 cc-mm/m²-24hr-atm | ASTM D1434 |
| UV Stability | > 2000 hours | ASTM G154 |
Users viewing this material also viewed the following:
- PolyOne Geon™ Vinyl Flexible XV3440 Polyvinyl Chloride, Flexible (PVC, Flexible)
- LATI LASTIROL TR-V0 Polystyrene (PS) (UL94 V-0) (discontinued **)
- PolyOne Geon™ Vinyl Flexible C70UB Polyvinyl Chloride, Flexible (PVC, Flexible)
- Glastic GLASTHERM S Insulation Sheet
- Karina 40/447-FC-LMP Green Color Concentrate for PVC
- Lehmann & Voss LUVOCOM® 1100-8166 Polyether sulfone, with glass fiber, easy flowing
- SK Chemicals SKYTHANE® T850A Polyester Based, Low Hardness Thermoplastic Polyurethane Elastomer
- A. Schulman POLYBATCH™ Yellow P20199/2 Concentrate Based In Copolymer PP
- Solvay Engineered Polymers DEXFLEX® 826HS TPO (discontinued **)
Copyright © lookpolymers.com All Rights Reserved