POLYMER SEARCH

Solvay TechnylÂ® C 206 Nylon 6, EH50

Category	Polymer , Thermoplastic , Nylon , Nylon 6 , Nylon 6, Unreinforced
Manufacturer	Solvay
Trade Name	Technyl®
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Solvay TechnylÂ® C 206 Nylon 6, EH50.pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

Unreinforced Plyamide PA6, standard for fast cycling, for injection molding.Technyl C 206 has high fluidity and good mold release, favored by a high crystallization rate. It is specially suitable for the production of technical molding with fast injection cycles. This product is available in natural.Information provided by Rhodia; Rhodia has been acquired by Solvay.

Physical Properties	Metric	English	Comments
Density	1.14 g/cc	0.0412 lb/inÂ³	ISO 1183-A
Water Absorption	1.3 %	1.3 %	(Beginning Dry) 24 hours in water 23Â°C. ISO 62

Mechanical Properties	Metric	English	Comments
Tensile Strength, Yield	45.0 MPa	6530 psi	ISO 527
Elongation at Break	270 %	270 %	ISO 527
Tensile Modulus	1.10 GPa	160 ksi	ISO 527
Flexural Yield Strength	40.0 MPa	5800 psi	ISO 178
Flexural Modulus	1.00 GPa	145 ksi	ISO 178
Izod Impact Resistance	8.00 J/cmÂ²	38.1 ft-lb/inÂ²	ISO 180

Thermal Properties	Metric	English	Comments
Melting Point	222 Â°C	432 Â°F	ISO 3146-C

Electrical Properties	Metric	English	Comments
Electrical Resistivity	1.00e+11 ohm-cm	1.00e+11 ohm-cm	IEC 93
Surface Resistance	1.00e+11 ohm	1.00e+11 ohm	IEC 93
Dielectric Constant	3.9 @Frequency 1e+6 Hz	3.9 @Frequency 1e+6 Hz	IEC 250
Dielectric Strength	18.0 kV/mm	457 kV/in	IEC 243-1
Dissipation Factor	0.10 @Frequency 1e+6 Hz	0.10 @Frequency 1e+6 Hz	IEC 250

Processing Properties	Metric	English
Rear Barrel Temperature	220 - 230 Â°C	428 - 446 Â°F
Middle Barrel Temperature	225 - 235 Â°C	437 - 455 Â°F
Front Barrel Temperature	230 - 240 Â°C	446 - 464 Â°F

Users viewing this material also viewed the following: