Solvay Specialty Polymers Ixef® 2530/X9027 Polyarylamide, 55% Mineral + Glass Fiber, DAM (discontinued **)<

Category	Polymer , Thermoplastic , Polyarylamide (PAA) , Polyarylamide, Glass Fiber Filled
Manufacturer
Trade Name
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Solvay Specialty Polymers Ixef® 2530/X9027 Polyarylamide, 55% Mineral + Glass Fiber, DAM (discontinued **)<.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

The IXEF compounds are a family of semi-crystalline polyarylamide thermoplastics reinforced with glass fibers and/or mineral fillers for injection molding.Data provided by the manufacturer, Solvay Advanced Polymers.

Physical Properties	Metric	English	Comments
Density	1.85 g/cc	0.0668 lb/in³	ASTM D792
Water Absorption	0.10 %	0.10 %	24 hrs; ASTM D570
Moisture Absorption at Equilibrium	1.11 %	1.11 %	at 65% RH per Solvay test
Linear Mold Shrinkage, Flow	0.0020 cm/cm	0.0020 in/in

Mechanical Properties	Metric	English	Comments
Tensile Strength, Ultimate	150 MPa	21800 psi	ASTM D638
Elongation at Break	1.2 %	1.2 %	ASTM D638
Tensile Modulus	20.0 GPa	2900 ksi	ASTM D638
Flexural Yield Strength	220 MPa	31900 psi	ASTM D790
Flexural Modulus	20.0 GPa	2900 ksi	ASTM D790
Izod Impact, Notched	0.550 J/cm	1.03 ft-lb/in	ASTM D256
Izod Impact, Unnotched	2.90 J/cm	5.43 ft-lb/in	ASTM D256

Thermal Properties	Metric	English	Comments
CTE, linear	22.0 µm/m-°C @Temperature 20.0 °C	12.2 µin/in-°F @Temperature 68.0 °F	ASTM D696
Thermal Conductivity	0.300 W/m-K	2.08 BTU-in/hr-ft²-°F	ASTM C177
Melting Point	240 °C	464 °F
Deflection Temperature at 1.8 MPa (264 psi)	205 °C	401 °F	HDT/A; ASTM D648
Flammability, UL94	V-0 @Thickness 1.60 mm	V-0 @Thickness 0.0630 in	Solvay test
Oxygen Index	38.5 %	38.5 %	ASTM D2863

Electrical Properties	Metric	English	Comments
Electrical Resistivity	2.50e+15 ohm-cm	2.50e+15 ohm-cm	ASTM D257
Dielectric Constant	5.3 @Frequency 110 Hz	5.3 @Frequency 110 Hz	ASTM D150
Dielectric Strength	22.7 kV/mm	577 kV/in	ASTM D149
Dissipation Factor	0.023 @Frequency 110 Hz	0.023 @Frequency 110 Hz	ASTM D150
Arc Resistance	>= 60 sec	>= 60 sec	ASTM D495
Comparative Tracking Index	475 V	475 V	IEC 112

Processing Properties	Metric	English	Comments
Feed Temperature	250 - 280 °C	482 - 536 °F
Rear Barrel Temperature	250 - 280 °C	482 - 536 °F	Compression Zone
Middle Barrel Temperature	250 - 280 °C	482 - 536 °F	Homogenization Zone
Front Barrel Temperature	260 - 290 °C	500 - 554 °F	Nozzle Zone
Melt Temperature	<= 270 °C	<= 518 °F
Mold Temperature	120 - 140 °C	248 - 284 °F	Needed to develop high crystallinity
Injection Pressure	50.0 - 250 MPa	7250 - 36300 psi
Hold Pressure	30.0 - 150 MPa	4350 - 21800 psi
Back Pressure	0.000 - 1.00 MPa	0.000 - 145 psi

Users viewing this material also viewed the following: