Solvay Specialty Polymers AvaSpire® AV-722 Polyaryletherketone (PAEK) (Unverified Data**)

Category	Polymer , Thermoplastic , Polyketone
Manufacturer
Trade Name
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Solvay Specialty Polymers AvaSpire® AV-722 Polyaryletherketone (PAEK) (Unverified Data**).pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

AvaSpire AV-722 is an unreinforced polyaryletherketone (PAEK) that offers improved economics relative to PEEK while retaining most of PEEK's key performance attributes. AV-722 resin has been formulated for applications requiring high chemical resistance and mechanical strength along with low moisture absorption and good barrier properties. These and other properties make this resin well-suited for applications in healthcare, transportation, electronics, chemical processing and other industries. - Beige: AvaSpire AV-722 BG 20Injection Notes: Back Pressure: MinimumInformation provided by Solvay Specialty Polymers.

Physical Properties	Metric	English	Comments
Specific Gravity	1.32 g/cc	1.32 g/cc	ASTM D792
Water Absorption	0.10 % @Time 86400 sec	0.10 % @Time 24.0 hour	ASTM D570
Viscosity	450000 cP @Shear Rate 1000 1/s, Temperature 400 °C	450000 cP @Shear Rate 1000 1/s, Temperature 752 °F	Melt
Linear Mold Shrinkage, Flow	0.0080 - 0.010 cm/cm @Thickness 3.18 mm	0.0080 - 0.010 in/in @Thickness 0.125 in	5" x 0.5" x 0.125"; ASTM D955
Linear Mold Shrinkage, Transverse	0.012 - 0.014 cm/cm @Thickness 3.18 mm	0.012 - 0.014 in/in @Thickness 0.125 in	5" x 0.5" x 0.125"; ASTM D955
Melt Flow	1.0 g/10 min @Load 2.16 kg, Temperature 400 °C	1.0 g/10 min @Load 4.76 lb, Temperature 752 °F	ASTM D1238

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell M	95	95	M-Scale; ASTM D785
Tensile Strength	89.0 MPa	12900 psi	50 mm/min; ASTM D638
Tensile Strength, Yield	91.0 MPa	13200 psi	ISO 527-2/1A/50
Elongation at Break	25 %	25 %	50 mm/min; ASTM D638
	25 %	25 %	ISO 527-2/1A/50
Elongation at Yield	4.5 %	4.5 %	ISO 527-2/1A/50
	5.0 %	5.0 %	50 mm/min; ASTM D638
Tensile Modulus	3.70 GPa	537 ksi	50 mm/min; ASTM D638
	3.90 GPa	566 ksi	ISO 527-2/1A/1
Flexural Strength	138 MPa	20000 psi	ISO 178
	141 MPa	20500 psi	ASTM D790
Flexural Modulus	3.70 GPa	537 ksi	ASTM D790
	3.80 GPa	551 ksi	ISO 178
Compressive Strength	112 MPa	16200 psi	ASTM D695
Poissons Ratio	0.43	0.43	ASTM E132
Shear Modulus	1.29 - 1.36 GPa	187 - 197 ksi	Calculated
Shear Strength	79.0 MPa	11500 psi	ASTM D732
Izod Impact, Notched	0.800 J/cm	1.50 ft-lb/in	ASTM D256
	NB	NB	ASTM D4812
Izod Impact, Notched (ISO)	7.00 kJ/m²	3.33 ft-lb/in²	ISO 180
Izod Impact, Unnotched (ISO)	NB	NB	ISO 180

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	45.0 µm/m-°C @Temperature -50.0 - 50.0 °C	25.0 µin/in-°F @Temperature -58.0 - 122 °F	TMA; ASTM E831
Specific Heat Capacity	1.41 J/g-°C @Temperature 50.0 °C	0.337 BTU/lb-°F @Temperature 122 °F	DSC
	1.97 J/g-°C @Temperature 200 °C	0.471 BTU/lb-°F @Temperature 392 °F	DSC
Thermal Conductivity	0.220 W/m-K	1.53 BTU-in/hr-ft²-°F	ASTM E1530
Melting Point	340 °C	644 °F	Peak (major component); ASTM D3418
Deflection Temperature at 1.8 MPa (264 psi)	161 °C @Thickness 3.20 mm	322 °F @Thickness 0.126 in	Annealed; 2 hours at 200°C; ASTM D648
Glass Transition Temp, Tg	150 °C	302 °F	ASTM D3418
Oxygen Index	40 %	40 %	ASTM D2863

Electrical Properties	Metric	English	Comments
Volume Resistivity	3.10e+17 ohm-cm	3.10e+17 ohm-cm	ASTM D257
Surface Resistance	>= 1.90e+17 ohm	>= 1.90e+17 ohm	ASTM D257
Dielectric Constant	3.06 @Frequency 1.00e+6 Hz	3.06 @Frequency 1.00e+6 Hz	ASTM D150
	3.12 @Frequency 60.0 Hz	3.12 @Frequency 60.0 Hz	ASTM D150
Dielectric Strength	19.0 kV/mm @Thickness 3.00 mm	483 kV/in @Thickness 0.118 in	ASTM D149
	170 kV/mm @Thickness 0.0500 mm	4320 kV/in @Thickness 0.00197 in	Amorphous Film; ASTM D149
Dissipation Factor	0.0010 @Frequency 60.0 Hz	0.0010 @Frequency 60.0 Hz	ASTM D150
	0.0040 @Frequency 1.00e+6 Hz	0.0040 @Frequency 1.00e+6 Hz	ASTM D150

Processing Properties	Metric	English
Rear Barrel Temperature	354 °C	669 °F
Middle Barrel Temperature	366 °C	691 °F
Front Barrel Temperature	371 °C	700 °F
Nozzle Temperature	374 °C	705 °F
Mold Temperature	177 - 204 °C	351 - 399 °F
Drying Temperature	149 °C	300 °F
Dry Time	4.00 hour	4.00 hour

Descriptive Properties	Value	Comments
Appearance	Beige
Availability	Africa & Middle East
	Asia Pacific
	Europe
	North America
	South America
Features	Ductile
	Flame Retardant
	Good Chemical Resistance
	Good Dimensional Stability
	Good Impact Resistance
	High Heat Resistance
Forms	Pellets
Generic	PAEK
Injection Rate	Fast
Processing Method	Extrusion Blow Molding
	Fiber (Spinning) Extrusion
	Film Extrusion
	Injection Blow Molding
	Injection Molding
	Machining
	Profile Extrusion
	Thermoforming
	Wire & Cable Extrusion
Screw Compression Ratio	2.5:1.0 to 3.5:1.0
Uses	Aircraft Applications
	Automotive Applications
	Electrical/Electronic Applications
	Film
	Fuel Lines
	Gears
	Medical/Healthcare Applications
	Oil/Gas Applications
	Seals

Users viewing this material also viewed the following: