Solvay Specialty Polymers AvaSpire® AV-651 GF30 Polyaryletherketone (PAEK) (Unverified Data**)

Category	Polymer , Thermoplastic , Polyketone , Polyaryletherketone (PAEK), Glass Fiber Filled
Manufacturer
Trade Name
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Solvay Specialty Polymers AvaSpire® AV-651 GF30 Polyaryletherketone (PAEK) (Unverified Data**).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

AvaSpire AV-651 GF30 is a 30% glass fiber reinforced polyaryletherketone (PAEK) that has been specifically formulated to provide higher mechanical strength and stiffness than unfilled AV-651 resin. This resin offers chemical resistance nearly equivalent to glass fiber-reinforced PEEK in most chemicals, with a lower heat deflection temperature. These properties make it well suited for applications in healthcare, transportation, electronics, chemical processing and other industrial uses. - Beige: AvaSpire AV-651 GF30 BG 20 - Black: AvaSpire AV-651 GF30 BK 95Information provided by Solvay Specialty Polymers.

Physical Properties	Metric	English	Comments
Specific Gravity	1.52 g/cc	1.52 g/cc	ASTM D792
Filler Content	30 %	30 %	Glass Fiber Reinforcement
Water Absorption	0.20 % @Time 86400 sec	0.20 % @Time 24.0 hour	ASTM D570
Viscosity	410000 cP @Shear Rate 1000 1/s, Temperature 400 °C	410000 cP @Shear Rate 1000 1/s, Temperature 752 °F	Melt; ASTM D3835
Linear Mold Shrinkage, Flow	0.0020 - 0.0040 cm/cm @Thickness 3.18 mm	0.0020 - 0.0040 in/in @Thickness 0.125 in	5" x 0.5" x 0.125" bars; ASTM D955
Linear Mold Shrinkage, Transverse	0.013 - 0.015 cm/cm @Thickness 3.18 mm	0.013 - 0.015 in/in @Thickness 0.125 in	5" x 0.5" x 0.125" bars; ASTM D955
Melt Flow	9.0 g/10 min @Load 2.16 kg, Temperature 400 °C	9.0 g/10 min @Load 4.76 lb, Temperature 752 °F	ASTM D1238

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell M	101	101	M-Scale; ASTM D785
Tensile Strength	156 MPa	22600 psi	5.0 mm/min; ASTM D638
Tensile Strength, Yield	162 MPa	23500 psi	5 nm; ISO 527-2/1A/5
Elongation at Break	2.9 %	2.9 %	5.0 mm/min; ASTM D638
	2.9 %	2.9 %	ISO 527-2/1A/5
Tensile Modulus	9.90 GPa	1440 ksi	5.0 mm/min; ASTM D638
	10.4 GPa	1510 ksi	ISO 527-2/1A/1
Flexural Strength	228 MPa	33100 psi	ISO 178
	234 MPa	33900 psi	ASTM D790
Flexural Modulus	9.40 GPa	1360 ksi	ASTM D790
	9.70 GPa	1410 ksi	ISO 178
Compressive Strength	168 MPa	24400 psi	ASTM D695
Shear Strength	82.6 MPa	12000 psi	ASTM D732
Izod Impact, Notched	1.10 J/cm	2.06 ft-lb/in	ASTM D256
	9.60 J/cm	18.0 ft-lb/in	ASTM D4812
Izod Impact, Notched (ISO)	12.0 kJ/m²	5.71 ft-lb/in²	ISO 180
Izod Impact, Unnotched (ISO)	64.0 kJ/m²	30.5 ft-lb/in²	ISO 180

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	17.0 µm/m-°C @Temperature -50.0 - 50.0 °C	9.44 µin/in-°F @Temperature -58.0 - 122 °F	TMA; ASTM E831
Specific Heat Capacity	1.27 J/g-°C @Temperature 50.0 °C	0.304 BTU/lb-°F @Temperature 122 °F	DSC
	1.65 J/g-°C @Temperature 200 °C	0.394 BTU/lb-°F @Temperature 392 °F	DSC
Thermal Conductivity	0.300 W/m-K	2.08 BTU-in/hr-ft²-°F	ASTM E1530
Melting Point	345 °C	653 °F	Peak; ASTM D3418
Deflection Temperature at 1.8 MPa (264 psi)	213 °C	415 °F	Annealed; ASTM D648
Glass Transition Temp, Tg	158 °C	316 °F	ASTM D3418
Flammability, UL94	V-1 @Thickness 0.800 mm	V-1 @Thickness 0.0315 in	UL 94
	V-0 @Thickness 1.60 mm	V-0 @Thickness 0.0630 in	UL 94

Electrical Properties	Metric	English	Comments
Volume Resistivity	2.00e+17 ohm-cm	2.00e+17 ohm-cm	ASTM D257
Surface Resistance	>= 1.90e+17 ohm	>= 1.90e+17 ohm	ASTM D257
Dielectric Constant	3.58 @Frequency 1.00e+6 Hz	3.58 @Frequency 1.00e+6 Hz	ASTM D150
	3.61 @Frequency 60.0 Hz	3.61 @Frequency 60.0 Hz	ASTM D150
	3.63 @Frequency 1000 Hz	3.63 @Frequency 1000 Hz	ASTM D150
Dielectric Strength	17.0 kV/mm @Thickness 3.00 mm	432 kV/in @Thickness 0.118 in	ASTM D149
Dissipation Factor	0.0020 @Frequency 60.0 Hz	0.0020 @Frequency 60.0 Hz	ASTM D150
	0.0040 @Frequency 1.00e+6 Hz	0.0040 @Frequency 1.00e+6 Hz	ASTM D150

Processing Properties	Metric	English
Rear Barrel Temperature	365 °C	689 °F
Middle Barrel Temperature	371 °C	700 °F
Front Barrel Temperature	377 °C	711 °F
Nozzle Temperature	382 °C	720 °F
Melt Temperature	366 - 388 °C	691 - 730 °F
Mold Temperature	160 - 190 °C	320 - 374 °F
Drying Temperature	149 °C	300 °F
Dry Time	4.00 hour	4.00 hour

Descriptive Properties	Value	Comments
Agency Ratings	ISO 10993
	ISO 10993-Part 1
Appearance	Beige
	Black
Availability	Africa & Middle East
	Asia Pacific
	Europe
	North America
	South America
Features	Autoclave Sterilizable
	Biocompatible
	E-beam Sterilizable
	Ethylene Oxide Sterilizable
	Fatigue Resistant
	Flame Retardant
	Good Chemical Resistance
	Good Dimensional Stability
	Good Sterilizability
	Heat Sterilizable
	High Heat Resistance
	High Stiffness
	High Strength
	Radiation (Gamma) Resistant
	Radiation Sterilizable
	Radiotranslucent
	Steam Resistant
	Steam Sterilizable
Forms	Pellets
Generic	PAEK
Injection Rate	Fast
Processing Method	Injection Molding
	Machining
	Profile Extrusion
Screw Compression Ratio	2.0:1.0 to 3.0:1.0
Uses	Aircraft Applications
	Connectors
	Dental Applications
	Electrical/Electronic Applications
	Film
	Hospital Goods
	Industrial Applications
	Medical Appliances
	Medical/Healthcare Applications
	Seals
	Surgical Instruments

Users viewing this material also viewed the following: