Solvay Specialty Polymers Amodel® A-1115 HS Polyphthalamide (PPA) Resin, 15% Glass Reinforced, Dry As Molded

Category	Polymer , Thermoplastic , Polyphthalamide (PPA) , Polyphthalamide (PPA), 20% Glass Fiber Reinforced
Manufacturer
Trade Name
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Solvay Specialty Polymers Amodel® A-1115 HS Polyphthalamide (PPA) Resin, 15% Glass Reinforced, Dry As Molded .pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

AMODEL A-1115 HS resin is a 15% glass reinforced, heat stabilized polyphthalamide (PPA) which exhibits a high deflection temperature, high flexural modulus, and high tensile strength. Excellent creep resistance and low moisture absorption are also characteristic of this resin. AMODEL A-1115 HS resin can be easily processed using conventional equipment and methods.This product line was acquired by Solvay Advanced Polymers from BP Amoco in November 2001.MatWeb has an entry for this material conditioned at 50% RH.

Physical Properties	Metric	English	Comments
Density	1.26 g/cc	0.0455 lb/in³	ASTM D792
Water Absorption	0.30 %	0.30 %	24 hrs. ASTM D570
Linear Mold Shrinkage, Flow	0.0060 cm/cm	0.0060 in/in	ASTM D955

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell R	127	127	ASTM D785
Tensile Strength, Ultimate	128 MPa	18600 psi	ASTM D638
Elongation at Break	2.0 %	2.0 %	ASTM D638
Tensile Modulus	8.30 GPa	1200 ksi	ASTM D638
Flexural Yield Strength	171 MPa	24800 psi	ASTM D790
Flexural Modulus	6.20 GPa	899 ksi	ASTM D790
Compressive Yield Strength	207 MPa	30000 psi	ASTM D695
Poissons Ratio	0.41	0.41
Shear Modulus	2.94 GPa	426 ksi	Calculated
Shear Strength	88.0 MPa	12800 psi	ASTM D732
Izod Impact, Notched	0.440 J/cm	0.824 ft-lb/in	ASTM D256
Izod Impact, Unnotched	4.38 J/cm	8.21 ft-lb/in	ASTM D256

Thermal Properties	Metric	English	Comments
CTE, linear	12.0 µm/m-°C @Temperature 160 - 250 °C	6.67 µin/in-°F @Temperature 320 - 482 °F	FD; ASTM E831
	35.0 µm/m-°C @Temperature 0.000 - 100 °C	19.4 µin/in-°F @Temperature 32.0 - 212 °F	FD; ASTM E831
	95.0 µm/m-°C @Temperature 160 - 250 °C	52.8 µin/in-°F @Temperature 320 - 482 °F	TD; ASTM E831
CTE, linear, Transverse to Flow	59.0 µm/m-°C @Temperature 0.000 - 100 °C	32.8 µin/in-°F @Temperature 32.0 - 212 °F	ASTM E381
Melting Point	310 °C	590 °F	ASTM D3418
Maximum Service Temperature, Air	160 °C	320 °F	20,000 hours continuous use; ASTM D3045
Deflection Temperature at 0.46 MPa (66 psi)	292 °C	558 °F	ASTM D648
Deflection Temperature at 1.8 MPa (264 psi)	277 °C	531 °F	ASTM D648
Flammability, UL94	HB @Thickness 3.20 mm	HB @Thickness 0.126 in
	HB @Thickness 3.20 mm	HB @Thickness 0.126 in

Electrical Properties	Metric	English	Comments
Electrical Resistivity	1.00e+16 ohm-cm	1.00e+16 ohm-cm	ASTM D257
Dielectric Constant	3.9 @Frequency 1e+6 Hz	3.9 @Frequency 1e+6 Hz	ASTM D150
	4.2 @Frequency 60 Hz	4.2 @Frequency 60 Hz	ASTM D150
Dielectric Strength	19.0 kV/mm	483 kV/in	ASTM D149
Dissipation Factor	0.0060 @Frequency 60 Hz	0.0060 @Frequency 60 Hz	ASTM D150
	0.020 @Frequency 1e+6 Hz	0.020 @Frequency 1e+6 Hz	ASTM D150
Arc Resistance	130 sec	130 sec	ASTM D495
Comparative Tracking Index	550 V	550 V

Processing Properties	Metric	English	Comments
Melt Temperature	321 - 343 °C	610 - 649 °F	Injection

Users viewing this material also viewed the following: