POLYMER SEARCH

Samyang TriloyÂ® 215 PC/ABS alloy

Category	Polymer , Thermoplastic , ABS Polymer , Polycarbonate/ABS Alloy, Unreinforced , Polycarbonate (PC)
Manufacturer	Samyang
Trade Name	Triloy®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Samyang TriloyÂ® 215 PC/ABS alloy.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Characteristics:Dimensional stabilityHigh heat resistanceGood flowApplications:Camera partsExterior panelCluster fasciaWheel coverStructural applicationI/P. core panelHelmet shellGlove box doorCowl vent grillAll information provided by Samyang

Physical Properties	Metric	English	Comments
Specific Gravity	1.14 g/cc	1.14 g/cc	ASTM D792
Water Absorption	0.20 % @Time 86400 sec	0.20 % @Time 24.0 hour	ASTM D570
Linear Mold Shrinkage	0.0050 - 0.0070 cm/cm @Thickness 3.00 mm	0.0050 - 0.0070 in/in @Thickness 0.118 in	ASTM D955
Melt Flow	9.0 g/10 min @Load 5.00 kg, Temperature 250 Â°C	9.0 g/10 min @Load 11.0 lb, Temperature 482 Â°F	ASTM D1238

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell R	120	120	ASTM D785
Tensile Strength, Yield	58.8 MPa	8530 psi	ASTM D638
Elongation at Break	120 %	120 %	ASTM D638
Flexural Yield Strength	83.4 MPa	12100 psi	ASTM D790
Flexural Modulus	2.45 GPa	356 ksi	ASTM D790
Izod Impact, Unnotched	7.85 J/cm @Thickness 3.17 mm	14.7 ft-lb/in @Thickness 0.125 in	ASTM D256

Thermal Properties	Metric	English	Comments
CTE, linear	73.0 Âµm/m-Â°C	40.6 Âµin/in-Â°F	ASTM D696
Deflection Temperature at 1.8 MPa (264 psi)	118 Â°C	244 Â°F	ASTM D648
Flammability, UL94	HB @Thickness 1.59 mm	HB @Thickness 0.0625 in

Electrical Properties	Metric	English	Comments
Volume Resistivity	5.00e+16 ohm-cm	5.00e+16 ohm-cm	ASTM D257
Dielectric Constant	3.0 @Frequency 1.00e+6 Hz	3.0 @Frequency 1.00e+6 Hz	ASTM D150
Dielectric Strength	25.0 kV/mm	635 kV/in	ASTM D149
Dissipation Factor	0.0090 @Frequency 1.00e+6 Hz	0.0090 @Frequency 1.00e+6 Hz	ASTM D150
Arc Resistance	123 sec	123 sec	ASTM D495

Processing Properties	Metric	English
Rear Barrel Temperature	230 - 250 Â°C	446 - 482 Â°F
Middle Barrel Temperature	220 - 240 Â°C	428 - 464 Â°F
Front Barrel Temperature	210 - 230 Â°C	410 - 446 Â°F
Nozzle Temperature	240 - 250 Â°C	464 - 482 Â°F
Melt Temperature	240 - 250 Â°C	464 - 482 Â°F
Drying Temperature	120 Â°C	248 Â°F
Dry Time	3 - 5 hour	3 - 5 hour
Moisture Content	<= 0.020 %	<= 0.020 %
Screw Speed	30 - 80 rpm	30 - 80 rpm

Users viewing this material also viewed the following: