Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

SABIC Innovative Plastics Valox® DR48 PBT

Category Polymer , Thermoplastic , Polyester, TP , Polybutylene Terephthalate (PBT)
Manufacturer SABIC Innovative Plastics (GE Plastics)
Trade Name Valox®
Port Shanghai port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF SABIC Innovative Plastics Valox® DR48 PBT.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
17% glass reinforced, flame retardant grade UL-94 rated V-0/5VA.
Physical Properties Metric English Comments
Specific Gravity 1.53 g/cc
1.53 g/cc
ASTM D792
Water Absorption 0.070 %

@Time 86400 sec
 0.070 %

@Time 24.0 hour
 ASTM D570
Linear Mold Shrinkage, Flow 0.0040 - 0.0060 cm/cm

@Thickness 1.50 - 3.20 mm
 0.0040 - 0.0060 in/in

@Thickness 0.0591 - 0.126 in
 SABIC Method
0.0060 - 0.0090 cm/cm

@Thickness 3.20 - 4.60 mm
 0.0060 - 0.0090 in/in

@Thickness 0.126 - 0.181 in
 SABIC Method
Linear Mold Shrinkage, Transverse 0.0050 - 0.0080 cm/cm

@Thickness 1.50 - 3.20 mm
 0.0050 - 0.0080 in/in

@Thickness 0.0591 - 0.126 in
 SABIC Method
0.0080 - 0.011 cm/cm

@Thickness 3.20 - 4.60 mm
 0.0080 - 0.011 in/in

@Thickness 0.126 - 0.181 in
 SABIC Method
Mechanical Properties Metric English Comments
Hardness, Rockwell R 118
118
ASTM D785
Tensile Strength at Break 93.0 MPa
13500 psi
Type I, 5 mm/min; ASTM D638
Flexural Strength 144 MPa
20900 psi
1.3 mm/min, 50 mm span; ASTM D790
Flexural Modulus 5.03 GPa
730 ksi
1.3 mm/min, 50 mm span; ASTM D790
Izod Impact, Notched 0.530 J/cm
0.993 ft-lb/in
ASTM D256
Izod Impact, Unnotched 5.34 J/cm
10.0 ft-lb/in
ASTM D4812
Thermal Properties Metric English Comments
CTE, linear, Parallel to Flow 19.8 µm/m-°C

@Temperature -40.0 - 40.0 °C
 11.0 µin/in-°F

@Temperature -40.0 - 104 °F
 ASTM E 831
19.8 µm/m-°C

@Temperature 60.0 - 138 °C
 11.0 µin/in-°F

@Temperature 140 - 280 °F
 ASTM E 831
Deflection Temperature at 0.46 MPa (66 psi) 210 °C

@Thickness 6.40 mm
 410 °F

@Thickness 0.252 in
 unannealed; ASTM D648
Deflection Temperature at 1.8 MPa (264 psi) 182 °C

@Thickness 6.40 mm
 360 °F

@Thickness 0.252 in
 unannealed; ASTM D648
UL RTI, Electrical 120 °C
248 °F
UL 746B
UL RTI, Mechanical with Impact 120 °C
248 °F
UL 746B
UL RTI, Mechanical without Impact 140 °C
284 °F
UL 746B
Flammability, UL94 V-0

@Thickness 0.890 mm
 V-0

@Thickness 0.0350 in
 UL 94
5VA

@Thickness 3.00 mm
 5VA

@Thickness 0.118 in
 UL 94
Oxygen Index 29 %
29 %
ASTM D2863
Glow Wire Test 700 °C
1290 °F
IEC 60695-2-13
725 °C
1340 °F
IEC 60695-2-13
960 °C

@Thickness 1.00 mm
 1760 °F

@Thickness 0.0394 in
 IEC 60695-2-12
960 °C

@Thickness 3.00 mm
 1760 °F

@Thickness 0.118 in
 IEC 60695-2-12
Electrical Properties Metric English Comments
Volume Resistivity 3.60e+16 ohm-cm
3.60e+16 ohm-cm
ASTM D257
Dielectric Constant 3.4

@Frequency 1.00e+6 Hz
 3.4

@Frequency 1.00e+6 Hz
 ASTM D150
3.6

@Frequency 100 Hz
 3.6

@Frequency 100 Hz
 ASTM D150
Dielectric Strength 18.9 kV/mm

@Thickness 3.20 mm
 480 kV/in

@Thickness 0.126 in
 in air; ASTM D149
25.6 kV/mm

@Thickness 1.60 mm
 650 kV/in

@Thickness 0.0630 in
 in oil; ASTM D149
Dissipation Factor 0.0020

@Frequency 100 Hz
 0.0020

@Frequency 100 Hz
 ASTM D150
0.020

@Frequency 1.00e+6 Hz
 0.020

@Frequency 1.00e+6 Hz
 ASTM D150
Arc Resistance 60 - 120 sec
60 - 120 sec
Tungsten; ASTM D495
Comparative Tracking Index 175 - 250 V
175 - 250 V
UL 746A
Hot Wire Ignition, HWI 15 - 30 sec
15 - 30 sec
UL 746A
High Amp Arc Ignition, HAI >= 120 arcs
>= 120 arcs
UL 746A
High Voltage Arc-Tracking Rate, HVTR >= 150 mm/min
>= 5.91 in/min
UL 746A
Descriptive Properties Value Comments
Ball Pressure Test, 125°C +/- 2°C PASSES
IEC 60695-10-2
Specific Volume 0.66cm^3/g
ASTM D792
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved