POLYMER SEARCH

SABIC Innovative Plastics Lexan® 194 PC

Category	Polymer , Thermoplastic , Polycarbonate (PC)
Manufacturer	SABIC Innovative Plastics (GE Plastics)
Trade Name	Lexan®
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	SABIC Innovative Plastics Lexan® 194 PC.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Nonhalogenated. 8.5 MFR. High impact. Thick wall sections. Opaques only. FDA food contact compliant in limited colors.This data was supplied by SABIC-IP for the Americas region.

Physical Properties	Metric	English	Comments
Specific Gravity	1.19 g/cc	1.19 g/cc	ASTM D 792
Water Absorption	0.19 % @Time 86400 sec	0.19 % @Time 24.0 hour	ASTM D 570
Moisture Absorption at Equilibrium	0.37 % @Temperature 23.0 °C	0.37 % @Temperature 73.4 °F	ASTM D 570
	0.54 % @Temperature 100 °C	0.54 % @Temperature 212 °F	ASTM D 570
Linear Mold Shrinkage, Flow	0.0050 - 0.0070 cm/cm @Thickness 3.20 mm	0.0050 - 0.0070 in/in @Thickness 0.126 in	SABIC Method
Melt Flow	8.5 g/10 min @Load 1.20 kg, Temperature 300 °C	8.5 g/10 min @Load 2.65 lb, Temperature 572 °F	ASTM D 1238

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell M	68	68	ASTM D 785
Hardness, Rockwell R	118	118	ASTM D 785
Tensile Strength at Break	63.0 MPa	9140 psi	Type I, 50 mm/min; ASTM D 638
Tensile Strength, Yield	58.0 MPa	8410 psi	Type I, 50 mm/min; ASTM D 638
Elongation at Break	115 %	115 %	Type I, 50 mm/min; ASTM D 638
Elongation at Yield	7.0 %	7.0 %	Type I, 50 mm/min; ASTM D 638
Flexural Yield Strength	81.0 MPa	11700 psi	1.3 mm/min, 50 mm span; ASTM D 790
Flexural Modulus	2.13 GPa	309 ksi	1.3 mm/min, 50 mm span; ASTM D 790
Izod Impact, Notched	7.47 J/cm @Temperature 23.0 °C	14.0 ft-lb/in @Temperature 73.4 °F	ASTM D 256
Izod Impact, Unnotched	32.04 J/cm @Temperature 23.0 °C	60.02 ft-lb/in @Temperature 73.4 °F	ASTM D 4812
Tensile Impact Strength	420 kJ/m²	200 ft-lb/in²	Type S; ASTM D 1822
Dart Drop, Total Energy	169 J @Temperature 23.0 °C	125 ft-lb @Temperature 73.4 °F	ASTM D 3029
Taber Abrasion, mg/1000 Cycles	20 @Load 1.00 kg	20 @Load 2.20 lb	CS-17; ASTM D 1044

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	64.8 µm/m-°C @Temperature -40.0 - 95.0 °C	36.0 µin/in-°F @Temperature -40.0 - 203 °F	ASTM E 831
Deflection Temperature at 0.46 MPa (66 psi)	137 °C @Thickness 6.40 mm	279 °F @Thickness 0.252 in	unannealed; ASTM D 648
Deflection Temperature at 1.8 MPa (264 psi)	126 °C @Thickness 6.40 mm	259 °F @Thickness 0.252 in	unannealed; ASTM D 648

Electrical Properties	Metric	English	Comments
Volume Resistivity	2.50e+17 ohm-cm	2.50e+17 ohm-cm	ASTM D 257
Dielectric Constant	3.0 @Frequency 1.00e+6 Hz	3.0 @Frequency 1.00e+6 Hz	ASTM D 150
Dielectric Strength	16.3 kV/mm @Thickness 3.20 mm	414 kV/in @Thickness 0.126 in	in air; ASTM D 149
Dissipation Factor	0.00090 @Frequency 50.0 - 60.0 Hz	0.00090 @Frequency 50.0 - 60.0 Hz	ASTM D 150
	0.010 @Frequency 1.00e+6 Hz	0.010 @Frequency 1.00e+6 Hz	ASTM D 150

Users viewing this material also viewed the following: