Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

SABIC Innovative Plastics LNP Stat-kon RX89129 PA 66

Category Polymer , Thermoplastic , Nylon , Nylon 66
Manufacturer SABIC Innovative Plastics (GE Plastics)
Trade Name LNP STAT-KON
Port Ningbo port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF SABIC Innovative Plastics LNP Stat-kon RX89129 PA 66.pdf
Price EMAIL US    sales@lookpolymers.com
Material Notes:
LNP* Stat-Kon RX89129 is a compound based on Nylon 6,6. Fillers are proprietary.This data was supplied by SABIC-IP for the Americas region.
Physical Properties Metric English Comments
Density 1.20 g/cc
0.0434 lb/in³
ASTM D 792
Moisture Absorption at Equilibrium 0.94 %
0.94 %
23°C / 50% RH; ISO 62
0.62 %

@Time 86400 sec
 0.62 %

@Time 24.0 hour
 50% RH; ASTM D 570
Linear Mold Shrinkage, Flow 0.010 - 0.030 cm/cm

@Time 86400 sec
 0.010 - 0.030 in/in

@Time 24.0 hour
 ASTM D 955
Linear Mold Shrinkage, Transverse 0.010 - 0.030 cm/cm

@Time 86400 sec
 0.010 - 0.030 in/in

@Time 24.0 hour
 ASTM D 955
Mechanical Properties Metric English Comments
Tensile Strength at Break 67.0 MPa
9720 psi
5 mm/min; ISO 527
69.0 MPa
10000 psi
Type I, 5 mm/min; ASTM D 638
Tensile Strength, Yield 68.0 MPa
9860 psi
5 mm/min; ISO 527
69.0 MPa
10000 psi
Type I, 5 mm/min; ASTM D 638
Elongation at Break 4.0 %
4.0 %
Type I, 5 mm/min; ASTM D 638
4.1 %
4.1 %
5 mm/min; ISO 527
Elongation at Yield 4.0 %
4.0 %
Type I, 5 mm/min; ASTM D 638
4.0 %
4.0 %
5 mm/min; ISO 527
Tensile Modulus 3.31 GPa
480 ksi
1 mm/min; ISO 527
3.45 GPa
500 ksi
50 mm/min; ASTM D 638
Flexural Strength 95.0 MPa
13800 psi
1.3 mm/min, 50 mm span; ASTM D 790
Flexural Modulus 2.59 GPa
376 ksi
1.3 mm/min, 50 mm span; ASTM D 790
3.10 GPa
450 ksi
2 mm/min; ISO 178
Izod Impact, Notched 0.420 J/cm

@Temperature 23.0 °C
 0.787 ft-lb/in

@Temperature 73.4 °F
 ASTM D 256
Izod Impact, Unnotched 7.15 J/cm

@Temperature 23.0 °C
 13.4 ft-lb/in

@Temperature 73.4 °F
 ASTM D 4812
Izod Impact, Notched (ISO) 6.00 kJ/m²

@Temperature 23.0 °C
 2.86 ft-lb/in²

@Temperature 73.4 °F
 80*10*4; ISO 180/1A
Izod Impact, Unnotched (ISO) 44.0 kJ/m²

@Temperature 23.0 °C
 20.9 ft-lb/in²

@Temperature 73.4 °F
 80*10*4; ISO 180/1U
Impact Test 1.00 J
0.738 ft-lb
Multiaxial Impact; ISO 6603
Thermal Properties Metric English Comments
CTE, linear, Parallel to Flow 81.0 µm/m-°C

@Temperature -30.0 - 30.0 °C
 45.0 µin/in-°F

@Temperature -22.0 - 86.0 °F
 ASTM D 696
CTE, linear, Transverse to Flow 87.0 µm/m-°C

@Temperature -30.0 - 30.0 °C
 48.3 µin/in-°F

@Temperature -22.0 - 86.0 °F
 ASTM D 696
Deflection Temperature at 0.46 MPa (66 psi) 213 °C
415 °F
Flatw 80*10*4 sp=64mm; ISO 75/Bf
224 °C

@Thickness 3.20 mm
 435 °F

@Thickness 0.126 in
 unannealed; ASTM D 648
Deflection Temperature at 1.8 MPa (264 psi) 91.0 °C
196 °F
Flatw 80*10*4 sp=64mm; ISO 75/Af
91.0 °C

@Thickness 3.20 mm
 196 °F

@Thickness 0.126 in
 unannealed; ASTM D 648
Electrical Properties Metric English Comments
Surface Resistance 1.0 - 3.0 ohm
1.0 - 3.0 ohm
ASTM D 257
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved