SABIC Innovative Plastics LNP LUBRICOMP ZFL24 PPE+PS

Category	Polymer , Thermoplastic , Polyphenylene Ether/PPO , Polystyrene (PS)
Manufacturer	SABIC Innovative Plastics (GE Plastics)
Trade Name	LNP LUBRICOMP
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	SABIC Innovative Plastics LNP LUBRICOMP ZFL24 PPE+PS.pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

LNP* LUBRICOMP* ZFL24 is a compound based on PPE+PS resin containing 20% Glass Fiber, 10% PTFE. Added feature of this grade is: Wear Resistant.

Physical Properties	Metric	English	Comments
Specific Gravity	1.29 g/cc	1.29 g/cc	ASTM D792
Density	1.29 g/cc	0.0466 lb/inÂ³	ASTM D792
Moisture Absorption	0.0600 %	0.0600 %	50% RH, 24 hrs; ASTM D570
	0.140 %	0.140 %	23Â°C / 50% RH; ISO 62
Linear Mold Shrinkage, Flow	0.0030 - 0.0060 cm/cm @Time 86400 sec	0.0030 - 0.0060 in/in @Time 24.0 hour	ASTM D955
Linear Mold Shrinkage, Transverse	0.0050 - 0.0080 cm/cm @Time 86400 sec	0.0050 - 0.0080 in/in @Time 24.0 hour	ASTM D955

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	92.0 MPa	13300 psi	5 mm/min; ISO 527
	96.0 MPa	13900 psi	Type I, 5 mm/min; ASTM D638
Elongation at Break	1.9 %	1.9 %	5 mm/min; ISO 527
	2.0 %	2.0 %	Type I, 5 mm/min; ASTM D638
Tensile Modulus	7.12 GPa	1030 ksi	1 mm/min; ISO 527
	7.54 GPa	1090 ksi	50 mm/min; ASTM D638
Flexural Strength	138 MPa	20000 psi	ISO 178
	143 MPa	20700 psi	1.3 mm/min, 50 mm span; ASTM D790
Flexural Yield Strength	144 MPa	20900 psi	1.3 mm/min, 50 mm span; ASTM D790
Flexural Modulus	6.57 GPa	953 ksi	2 mm/min; ISO 178
	6.88 GPa	998 ksi	1.3 mm/min, 50 mm span; ASTM D790
Izod Impact, Notched	0.990 J/cm	1.85 ft-lb/in	ASTM D256
Izod Impact, Unnotched	4.69 J/cm	8.79 ft-lb/in	ASTM D4812
Izod Impact, Notched (ISO)	9.00 kJ/mÂ²	4.28 ft-lb/inÂ²	80104; ISO 180/1A
Izod Impact, Unnotched (ISO)	28.0 kJ/mÂ²	13.3 ft-lb/inÂ²	80104; ISO 180/1U
Dart Drop, Total Energy	10.0 J @Temperature 23.0 Â°C	7.38 ft-lb @Temperature 73.4 Â°F	ASTM D3763
Impact Test	3.00 J	2.21 ft-lb	Multiaxial Impact; ISO 6603
Coefficient of Friction, Dynamic	0.47	0.47	ASTM D3702 Modified
Coefficient of Friction, Static	0.54	0.54	ASTM D3702 Modified
K (wear) Factor	38.3 x 10^-8 mmÂ³/N-M	19.0 x 10^-10 inÂ³-min/ft-lb-hr	Ring; ASTM D3702 Modified
	203 x 10^-8 mmÂ³/N-M	101 x 10^-10 inÂ³-min/ft-lb-hr	Washer; ASTM D3702 Modified

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	72.0 Âµm/m-Â°C @Temperature -30.0 - 30.0 Â°C	40.0 Âµin/in-Â°F @Temperature -22.0 - 86.0 Â°F	ASTM D696
CTE, linear, Transverse to Flow	56.0 Âµm/m-Â°C @Temperature -30.0 - 30.0 Â°C	31.1 Âµin/in-Â°F @Temperature -22.0 - 86.0 Â°F	ASTM D696
Deflection Temperature at 0.46 MPa (66 psi)	136 Â°C	277 Â°F	Flatw 80104 sp=64mm; ISO 75/Bf
	136 Â°C @Thickness 3.20 mm	277 Â°F @Thickness 0.126 in	unannealed; ASTM D648
Deflection Temperature at 1.8 MPa (264 psi)	130 Â°C	266 Â°F	Flatw 80104 sp=64mm; ISO 75/Af
	131 Â°C @Thickness 3.20 mm	268 Â°F @Thickness 0.126 in	unannealed; ASTM D648

Users viewing this material also viewed the following: