POLYMER SEARCH

Rogers Corporation RO4450F Prepreg

Category	Polymer , Thermoset
Manufacturer	Rogers Corporation
Trade Name
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Rogers Corporation RO4450F Prepreg.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Prepreg is commonly used to inexpensively form less critical signal layers in antenna designs. A high post-cure Tg makes RO4400 series prepreg an excellent choice for multi-layers requiring sequential laminations as fully cured RO4400 prepregs are capable of handling multiple lamination cycle.RO4450F™ prepreg has demonstrated improvement in lateral flow capability.Information provided by Rogers Corporation.

Physical Properties	Metric	English	Comments
Density	1.83 g/cc	0.0661 lb/in³	ASTM D792
Moisture Absorption at Equilibrium	0.090 % @Temperature 50.0 °C, Time 173000 sec	0.090 % @Temperature 122 °F, Time 48.0 hour	Immersion; 0.06 in thick; ASTM D570
Thickness	102 microns	4.00 mil

Mechanical Properties	Metric	English	Comments
Peel Strength	0.701 kN/m	4.00 pli	Copper adhesion; Z direction; 1/2 oz. EDC After Solder Float; IPC-TM-650 2.4.8

Thermal Properties	Metric	English	Comments
CTE, linear	17.0 µm/m-°C @Temperature -55.0 - 280 °C	9.44 µin/in-°F @Temperature -67.0 - 536 °F	Y Direction; IPC-TM-650 2.4.41
	19.0 µm/m-°C @Temperature -55.0 - 280 °C	10.6 µin/in-°F @Temperature -67.0 - 536 °F	X Direction; IPC-TM-650 2.4.41
	50.0 µm/m-°C @Temperature -55.0 - 280 °C	27.8 µin/in-°F @Temperature -67.0 - 536 °F	Z Direction; IPC-TM-650 2.4.41
Thermal Conductivity	0.650 W/m-K @Temperature 80.0 °C	4.51 BTU-in/hr-ft²-°F @Temperature 176 °F	Z Direction; ASTM C518
Glass Transition Temp, Tg	>= 280 °C @Temperature -60.0 - 300 °C	>= 536 °F @Temperature -76.0 - 572 °F	10°C/min, TGA; IPC-TM-650 2.4.24
Decomposition Temperature	390 °C	734 °F	TGA; ASTM D3850
Flammability, UL94	V-0	V-0

Electrical Properties	Metric	English	Comments
Volume Resistivity	8.93e+14 ohm-cm	8.93e+14 ohm-cm	50% RH; IPC 2.5.17.1
Dielectric Constant	3.47 - 3.57 @Frequency 1.00e+10 Hz	3.47 - 3.57 @Frequency 1.00e+10 Hz	Z direction; IPC-TM-650 2.5.5.5
Dielectric Strength	39.4 kV/mm	1000 kV/in	Z Direction, 50% RH; IPC-TM-650 2.5.6.2
Dissipation Factor	0.0040 @Frequency 1.00e+10 Hz	0.0040 @Frequency 1.00e+10 Hz	Z direction; IPC-TM-650 2.5.5.5

Users viewing this material also viewed the following: