Ravago Manufacturing Americas Hylac® FR134G10 ABS, 10% Glass Fiber Reinforced

Category	Polymer , Thermoplastic , ABS Polymer , Acrylonitrile Butadiene Styrene (ABS), 10% Glass Fiber Filled
Manufacturer	Ravago Manufacturing Americas, LLC
Trade Name	Hylac®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Ravago Manufacturing Americas Hylac® FR134G10 ABS, 10% Glass Fiber Reinforced.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Entec's proprietary products include a full range of compounds in the Nylon 6/6, Nylon 6, ABS, PBT, Polycarbonate, PC/ABS, PC/ASA, PC/PBT, and PPO/PPE resin families.Information provided by Ravago.

Physical Properties	Metric	English	Comments
Density	1.37 g/cc	0.0495 lb/in³	ASTM D792
Linear Mold Shrinkage	0.0030 - 0.0040 cm/cm	0.0030 - 0.0040 in/in	ASTM D955
Melt Flow	5.0 g/10 min @Load 3.80 kg, Temperature 230 °C	5.0 g/10 min @Load 8.38 lb, Temperature 446 °F	ASTM D1238

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell R	100	100	ASTM D785
Tensile Strength, Yield	46.9 MPa	6800 psi	ASTM D638
Elongation at Break	6.0 %	6.0 %	ASTM D638
Tensile Modulus	3.59 GPa	520 ksi	ASTM D638
Flexural Yield Strength	75.8 MPa	11000 psi	ASTM D790
Flexural Modulus	2.96 GPa	430 ksi	ASTM D790
Izod Impact, Notched	0.667 J/cm	1.25 ft-lb/in	73°F, 0.125 in; ASTM D256

Thermal Properties	Metric	English	Comments
CTE, linear	54.0 µm/m-°C @Temperature -40.0 - 176 °C	30.0 µin/in-°F @Temperature -40.0 - 349 °F	ASTM D696
Deflection Temperature at 0.46 MPa (66 psi)	104 °C	220 °F	Unannealed; ASTM D648
Deflection Temperature at 1.8 MPa (264 psi)	102 °C	215 °F	Unannealed; ASTM D648
Flammability, UL94	V-0	V-0	0.0590 in

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+15 ohm-cm	1.00e+15 ohm-cm	ASTM D257

Processing Properties	Metric	English	Comments
Rear Barrel Temperature	168 - 179 °C	335 - 355 °F
Middle Barrel Temperature	171 - 191 °C	340 - 375 °F
Front Barrel Temperature	182 - 193 °C	360 - 380 °F
Nozzle Temperature	177 - 188 °C	350 - 370 °F
Melt Temperature	202 °C	395 °F	Aim
Mold Temperature	48.9 - 71.1 °C	120 - 160 °F
Moisture Content	<= 0.10 %	<= 0.10 %
Injection Pressure	7.24 - 8.62 MPa	1050 - 1250 psi
Back Pressure	0.483 - 0.965 MPa	70.0 - 140 psi
Shot Size	40 - 80 %	40 - 80 %
Screw Speed	50 - 90 rpm	50 - 90 rpm

Descriptive Properties	Value	Comments
Holding Pressure	900 to 1100 psi
Injection Rate	Slow-Moderate

Users viewing this material also viewed the following: