Quadrant EPP Ertalon® 66 GF30 PA 66, 30% glass filled, extruded (ISO Data)

Category	Polymer , Thermoplastic , Nylon , Nylon 66 , Nylon 66, 30% Glass Fiber Filled
Manufacturer	Quadrant Engineering Plastics Products
Trade Name	Ertalon®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Quadrant EPP Ertalon® 66 GF30 PA 66, 30% glass filled, extruded (ISO Data).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Compared with virgin PA 66, this 30 % glass fibre reinforced and heat stabilised nylon grade offers increased strength, stiffness, creep resistance and dimensional stability whilst retaining an excellent wear resistance. It also allows higher max. service temperatures High mechanical strength, stiffness, hardness and toughness Good fatigue resistance High mechanical damping ability Good sliding properties Excellent wear resistance Good electrical insulating properties Good resistance to high energy radiation (gamma- and X-rays) Good machinability

Physical Properties	Metric	English	Comments
Density	1.29 g/cc	0.0466 lb/in³	ISO 1183-1
Moisture Absorption at Equilibrium	1.7 %	1.7 %	50% RH
Water Absorption at Saturation	5.5 %	5.5 %

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell M	76	76	ISO 2039-2
Hardness, Shore D	80	80
Ball Indentation Hardness	165 MPa	23900 psi	ISO 2039-1
Tensile Strength	85.0 MPa	12300 psi	at Yield; ISO 527-1/-2
Elongation at Break	5.0 %	5.0 %	ISO 527-1/-2
Tensile Modulus	5.00 GPa	725 ksi	ISO 527-1/-2
Compressive Strength	43.0 MPa @Strain 1 %	6240 psi @Strain 1 %	ISO 604
	77.0 MPa @Strain 2 %	11200 psi @Strain 2 %	ISO 604
	112 MPa @Strain 5 %	16200 psi @Strain 5 %	ISO 604
K Factor (ISO)	11 µm/km	11 µm/km
Charpy Impact Unnotched	5.00 J/cm²	23.8 ft-lb/in²	ISO 179-1/1eU
Charpy Impact, Notched	0.600 J/cm²	2.86 ft-lb/in²	ISO 179-1/1eA
Coefficient of Friction, Dynamic	0.25 - 0.40	0.25 - 0.40
Limiting Pressure Velocity	0.120 MPa-m/sec	3430 psi-ft/min	at 1 m/s unlubricated
	0.180 MPa-m/sec	5140 psi-ft/min	at 0.1 m/s unlubricated

Thermal Properties	Metric	English	Comments
CTE, linear	60.0 µm/m-°C @Temperature 23.0 - 100 °C	33.3 µin/in-°F @Temperature 73.4 - 212 °F
Thermal Conductivity	0.300 W/m-K	2.08 BTU-in/hr-ft²-°F
Melting Point	260 °C	500 °F	DSC, 10°C/min.; ISO 11357-1/-3
Maximum Service Temperature, Air	110 °C	230 °F	Continuous; 20,000 h
	120 °C	248 °F	Continuous; 5,000 h
Deflection Temperature at 1.8 MPa (264 psi)	150 °C	302 °F	ISO 75-1/-2
Flammability, UL94	HB	HB

Electrical Properties	Metric	English	Comments
Volume Resistivity	>= 1.0e+14 ohm-cm	>= 1.0e+14 ohm-cm	IEC 60093
Surface Resistivity per Square	>= 1.0e+13 ohm	>= 1.0e+13 ohm	IEC 60093
Dielectric Constant	3.9 @Frequency >=100000 Hz	3.9 @Frequency >=100000 Hz	IEC 60250
Dielectric Strength	27.0 kV/mm	686 kV/in
Dissipation Factor	0.012 @Frequency 100000 Hz	0.012 @Frequency 100000 Hz	IEC 60250
Comparative Tracking Index	475 V	475 V	IEC 60112

Compliance Properties	Metric	English
3A-Dairy	No	No
European Food 1935/2004	No	No
FDA	No	No
USP Class VI	No	No

Chemical Resistance Properties	Metric	English
Acids, Strong (pH 1-3)	Unacceptable	Unacceptable
Acids, Weak	Limited	Limited
Alcohols	Limited	Limited
Alkalies, Strong (pH 11-14)	Unacceptable	Unacceptable
Alkalies, Weak	Limited	Limited
Chlorinated Solvents	Limited	Limited
Continuous Sunlight	Limited	Limited
Hot Water / Steam	Limited	Limited
Hydrocarbons - Aliphatic	Acceptable	Acceptable
Hydrocarbons - Aromatic	Acceptable	Acceptable
Inorganic Salt Solutions	Acceptable	Acceptable
Ketones, Esters	Acceptable	Acceptable

Users viewing this material also viewed the following: