- HOME
- POLYMER SEARCH
- Thermoplastic
- Nylon
- Nylon 12
- Polyram PlusTek PD100 Nylon 12, Injection Molding
Polyram PlusTek PD100 Nylon 12, Injection Molding
| Category | Polymer , Thermoplastic , Nylon , Nylon 12 |
| Manufacturer | Polyram |
| Trade Name | PlusTek |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Polyram PlusTek PD100 Nylon 12, Injection Molding.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Outstanding polyamide 12 for injection molding applications.Information provided by Polyram Ram On Ind.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.02 g/cc | 0.0368 lb/in³ | DIN 53479 |
| Moisture Absorption at Equilibrium | 0.70 % | 0.70 % | 50%RH; DIN 53714 |
| Linear Mold Shrinkage | 0.015 cm/cm | 0.015 in/in |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell R | 120 | 120 | ASTM-D785 |
| Tensile Strength, Yield | 30.0 MPa | 4350 psi | ASTM-D638 |
| Elongation at Break | 20 % | 20 % | ASTM-D638 |
| Flexural Strength | 25.0 MPa | 3630 psi | ASTM D790 |
| Flexural Modulus | 0.450 GPa | 65.3 ksi | ASTM-D790 |
| Izod Impact, Notched | 1.50 J/cm @Temperature 23.0 °C |
2.81 ft-lb/in @Temperature 73.4 °F |
ASTM-D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Melting Point | 165 - 175 °C | 329 - 347 °F | |
| Deflection Temperature at 0.46 MPa (66 psi) | 125 °C | 257 °F | DIN 53461 |
| Deflection Temperature at 1.8 MPa (264 psi) | 55.0 °C | 131 °F | DIN 53461 |
| Flammability, UL94 | HB @Thickness 3.00 mm |
HB @Thickness 0.118 in |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.00e+15 ohm-cm | 1.00e+15 ohm-cm | DIN 53482 |
| Surface Resistance | 1.00e+13 ohm | 1.00e+13 ohm | DIN 53482 |
| Dielectric Constant | 3.5 @Frequency 1e+6 Hz |
3.5 @Frequency 1e+6 Hz |
VDE 0303/4 |
| Dielectric Strength | 100 kV/mm | 2540 kV/in | VDE 0303/4 |
Users viewing this material also viewed the following:
- Nilit FRIANYL B63 HS-GV15 Nylon 6 for injection molding, 15% glass fiber reinforced
- Nilit RECONYL B S20 Recycled nylon 6 for injection molding
- LG Chemical NBR 3280 High Acrylonitrile Polymer
- Greene Tweed CHEMRAZ® 505 Perfluoroelastomer
- Teknor Apex Telcar® TL-2530F Thermoplastic Elastomer
- Von Roll Isola IMI MICA MAT® Inorganic Bonded Mica Plate
- Formosa Plastics Formolon® 28 PVC
- Assab Steels MOLDMAX XL Copper Alloy for Plastic Molds
Copyright © lookpolymers.com All Rights Reserved