Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polyram PlusTek PA350M4 Nylon 6.6 for Injection Molding, 20% Mineral Reinforced

Category Polymer , Thermoplastic , Nylon , Nylon 66 , Nylon 66, 20% Mineral Filled
Manufacturer Polyram
Trade Name PlusTek
Port Ningbo port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Polyram PlusTek PA350M4 Nylon 6.6 for Injection Molding, 20% Mineral Reinforced.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
20% Mineral Reinforced Nylon 6.6 for injection molding applications.Information provided by Polyram.
Physical Properties Metric English Comments
Density 1.28 g/cc
0.0462 lb/in³
ISO 1183
Moisture Absorption at Equilibrium 2.2 %
2.2 %
50% RH; ISO 62
Water Absorption at Saturation 6.6 %
6.6 %
ISO 62
Linear Mold Shrinkage 0.0090 - 0.013 cm/cm
0.0090 - 0.013 in/in
ISO 2577
Mechanical Properties Metric English Comments
Hardness, Rockwell R 119
119
Tensile Strength, Yield 95.0 MPa
13800 psi
ISO 527
Elongation at Break 3.0 %
3.0 %
ISO 527
Flexural Strength 150 MPa
21800 psi
ISO 178
Flexural Modulus 4.00 GPa
580 ksi
ISO 178
Izod Impact, Notched (ISO) 6.50 kJ/m²
3.09 ft-lb/in²
ISO 180
Thermal Properties Metric English Comments
Melting Point 256 °C
493 °F
ISO 11357
Maximum Service Temperature, Air 80.0 °C
176 °F
Continuous use
200 °C
392 °F
Short peaks operation
Deflection Temperature at 0.46 MPa (66 psi) 140 °C
284 °F
ISO 75
Deflection Temperature at 1.8 MPa (264 psi) 230 °C
446 °F
ISO 75
Flammability, UL94 HB

@Thickness 3.00 mm
HB

@Thickness 0.118 in
Electrical Properties Metric English Comments
Volume Resistivity 1.00e+15 ohm-cm
1.00e+15 ohm-cm
IEC 60093
Surface Resistance 1.00e+12 ohm
1.00e+12 ohm
IEC 60093
Dielectric Constant 3.7

@Frequency 1.00e+6 Hz
3.7

@Frequency 1.00e+6 Hz
IEC 60250
Dielectric Strength 90.0 kV/mm
2290 kV/in
IEC 60250
Copyright © lookpolymers.com All Rights Reserved