PolyOne OnFlex™ AW 300-02 Thermoplastic Elastomer (TPE)

Category	Polymer , Thermoplastic , Elastomer, TPE
Manufacturer	PolyOne Corporation
Trade Name	OnFlex™
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	PolyOne OnFlex™ AW 300-02 Thermoplastic Elastomer (TPE).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

OnFlex™ AW 300-02 is a non-halogen flame retardant material designed for appliance wire applications. New Product. Commercial specifications have not been established.Purge thoroughly before and after use of this product with a low flow (0.5 - 2.5 MFR) polyethylene (PE) or polypropylene (PP). Screen Pack: 60/60 Screw: 3:1 to 3.5:1 compression ratio screw PVC screwInformation provided by PolyOne

Physical Properties	Metric	English	Comments
Specific Gravity	1.02 g/cc	1.02 g/cc	ASTM D792
Viscosity	35000 cP @Shear Rate 11200 1/s, Temperature 200 °C	35000 cP @Shear Rate 11200 1/s, Temperature 392 °F	ASTM D3835
	1.20e+6 cP @Shear Rate 67.0 1/s, Temperature 200 °C	1.20e+6 cP @Shear Rate 67.0 1/s, Temperature 392 °F	ASTM D3835
Maximum Moisture Content	0.020	0.020
Deformation	40 % @Temperature 150 °C	40 % @Temperature 302 °F	300g; UL 1581

Mechanical Properties	Metric	English	Comments
Hardness, Shore A	92	92	10 sec; ASTM D2240
Tensile Strength at Break	24.1 MPa	3500 psi	UL 1581
	17.9 MPa @Temperature 23.0 °C	2600 psi @Temperature 73.4 °F	Die C2 hr; ASTM D412
Elongation at Break	240 %	240 %	UL 1581
	240 % @Temperature 23.0 °C	240 % @Temperature 73.4 °F	Die C2 hr; ASTM D412

Electrical Properties	Metric	English	Comments
Dielectric Constant	2.42 @Frequency 50.0 Hz	2.42 @Frequency 50.0 Hz	IEC 60250-1969; IEC 60250
Dielectric Strength	51.0 kV/mm	1300 kV/in	IEC 60243-1
Dissipation Factor	0.0060	0.0060	TangentTest condition: 50 Hz IEC 60250-1969; IEC 60250

Processing Properties	Metric	English
Zone 1	180 - 190 °C	356 - 374 °F
Zone 2	185 - 200 °C	365 - 392 °F
Zone 3	185 - 210 °C	365 - 410 °F
Zone 4	185 - 210 °C	365 - 410 °F
Die Temperature	195 - 220 °C	383 - 428 °F
Drying Temperature	70.0 - 81.1 °C	158 - 178 °F
Dry Time	4.00 - 8.00 hour	4.00 - 8.00 hour

Descriptive Properties	Value	Comments
Appearance	Natural Color
Features	Flame Retardant
Forms	Pellets
Generic Material	TPE
Generic Name	Thermoplastic Elastomer (TPE)
Manufacturer / Supplier	GLS Thermoplastic Elastomers
Processing Method	Extrusion
Regional Availability	Africa & Middle East
	Asia Pacific
	Europe
	North America
	South America
Uses	Wire & Cable Applications
VW-1	pass	UL 1581

Users viewing this material also viewed the following: