Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength at Break | 17.9 MPa | 2600 psi | 2 in/min; ASTM D638 |
RheTech Products FT1001-00 Thermoplastic Polyolefin, Non-UV Stabilized, Natural Applications: Facias, claddings, and rocker panelsBodyside moldingsStep pads and bumper componentsInjection molding conditions reported in table.Information provided by RheTech Products. |
|||
Tensile Strength at Break | 17.9 MPa | 2600 psi | 2 in/min; ASTM D638 |
RheTech Products FT1001-74 Thermoplastic Polyolefin, Non-UV Stabilized, DX9 Black Applications: Scuff platesBodyside moldingsStep and hitch padsInjection molding conditions reported in table.Information provided by RheTech Products. |
|||
Tensile Strength at Break | 17.9 MPa | 2600 psi | 2 in/min; ASTM D638 |
RheTech Products FT1004-625UV Thermoplastic Polyolefin, UV Stabilized, Interior DX9 Black Applications: Step padsHitch padsScuff platesInjection molding conditions reported in table.Information provided by RheTech Products. |
|||
Tensile Strength at Break | 17.9 MPa | 2600 psi | 2 in/min; ASTM D638 |
RheTech Products FT2400-647UV Thermoplastic Polyolefin, UV Stabilized, 8798NM Grey Applications: Bumper rub stripsHitch padsScuff padsInjection molding conditions reported in table.Information provided by RheTech Products. |
|||
Tensile Strength at Break | 17.9 MPa | 2600 psi | 2 in/min; ASTM D638 |
RheTech Products FT2400-648UV Thermoplastic Polyolefin, UV Stabilized, 848 Black Applications: Bumper rub stripsHitch padsScuff padsInjection molding conditions reported in table.Information provided by RheTech Products. |
|||
Tensile Strength at Break | 17.9 MPa | 2600 psi | 2 in/min; ASTM D638 |
RheTech Products FT3080-00 Thermoplastic Polyolefin, Non-UV Stabilized, Natural Applications: Step padsHitch padsScuff padsInjection molding conditions reported in table.Information provided by RheTech Products. |
|||
Tensile Strength at Break | 17.9 MPa | 2600 psi | 2 in/min; ASTM D638 |
RheTech Products FT3080-50 Thermoplastic Polyolefin, UV Stabilized, YGYA Black Applications: Step padsHitch padsScuff platesInjection molding conditions reported in table.Information provided by RheTech Products. |
|||
Tensile Strength at Break | 17.9 MPa | 2600 psi | 2 in/min; ASTM D638 |
RheTech Products FT3080-757UV Thermoplastic Polyolefin, UV Stabilized, Pueblo Gold Applications: Step padsHitch padsScuff padsInjection molding conditions reported in table.Information provided by RheTech Products. |
|||
Tensile Strength at Break | 17.9 MPa | 2600 psi | 2 in/min; ASTM D638 |
RheTech Products FT4700-01A Thermoplastic Polyolefin, Non-UV Stabilized, Black Applications: CladdingsBodyside moldingsInjection molding conditions reported in table.Information provided by RheTech Products. |
|||
Tensile Strength at Break | 17.9 MPa | 2600 psi | 2 in/min; ASTM D638 |
RheTech Products FT4802-01 Thermoplastic Polyolefin, Non-UV Stabilized, Black Applications: Bodyside moldings and claddingsFacia and bumper coversExterior componentsInjection molding conditions reported in table.Information provided by RheTech Products. |
|||
Tensile Strength at Break | 17.9 MPa | 2600 psi | 2 in/min; ASTM D638 |
RheTech Products FT4802-690UVA Thermoplastic Polyolefin, UV Stabilized, HS5 Medium Dark Neutral Applications: Bodyside moldings and claddingsFacia and bumper coversExterior componentsInjection molding conditions reported in table.Information provided by RheTech Products. |
|||
Tensile Strength at Break | 17.9 MPa | 2600 psi | 2 in/min; ASTM D638 |
RheTech Products FT4802-691UV Thermoplastic Polyolefin, UV Stabilized, RJ3 Dark Grey Green Applications: Bodyside moldings and claddingsFacia and bumper coversExterior componentsInjection molding conditions reported in table.Information provided by RheTech Products. |
|||
Tensile Strength at Break | 17.9 MPa | 2600 psi | 2 in/min; ASTM D638 |
RheTech Products UVFT3082-74 Thermoplastic Polyolefin, 135K Flexural Modulus, UV Stabilized, Exterior DX9 Black Applications: Step padsHitch padsExterior trimInjection molding conditions reported in table.Information provided by RheTech Products. |
|||
Tensile Strength at Break | 17.9 MPa | 2600 psi | |
NEU Neuthane N8511-1H Aromatic, Polyester TPU Blend A blend of aromatic, polyester TPUs with good clarity |
|||
Tensile Strength at Break | 17.9 MPa | 2600 psi | ASTM D1412 |
Process Technologies Inc Sanifluor® 1000 Formulated Aflas® Elastomer O-Rings, Gaskets and Seals produced from Sanifluor® 1000 have excellent chemical, heat and steam resistance. They provide superior performance in hot water, steam and virtually all caustics; makin.. |
|||
Tensile Strength at Break | 17.9 MPa | 2600 psi | 510 mm/min; ASTM D638 |
PolyOne Geon™ Vinyl Flexible A90F1 Polyvinyl Chloride, Flexible (PVC, Flexible) Recommended for interior applications.Information provided by PolyOne |
|||
Tensile Strength at Break | 17.9 MPa | 2600 psi | molding; ASTM D638 |
LyondellBasell Petrothene® NA942000 Low Density Polyethylene, Film Extrusion Grade PETROTHENE NA942 is a series of resins designed especially for heavy duty film applications, such as bags used to package fertilizer, peat moss, decorative stone and agricultural and construction ma.. |
|||
Tensile Strength at Break | 17.9 MPa | 2600 psi | ASTM D1414 |
Greene Tweed FLUORAZ® 890 Fluoroelastomer, FEPM Sanitary gaskets made from Fluoraz® 890 are ideal for use in standard SIP and CIP applications where EPDMs and FKMs fail. While EDPMs and FKMs can provide a deal for extended periods, changes in.. |
|||
Tensile Strength at Break | 17.9 MPa | 2600 psi | ASTM D412 |
ITW Devcon Rubber Repair / Castable Urethane Cable Cast FR, Black Information provided by ITW Devcon |
|||
Tensile Strength at Break | 17.9 MPa | 2600 psi | ASTM D638 |
Teknor Apex Flexalloy® 89501-83FR Polyvinyl Chloride, Elastomer Notes: 105°C Insulation; RoHS Compliant Features: High Heat Resistance; Low Temperature Flexibility Uses Wet Rated Insulation Wire Types: NISPE-1; NISPE-2; SE; SEO; SEOW; SEW; SJE; SJEO; SJEOW; S.. |
|||
Tensile Strength at Break | 17.9 MPa | 2600 psi | ASTM D638 |
Teknor Apex MF 09-G0288A-87NT Polyvinyl Chloride, Flexible Film Uses: Medical/Healthcare Applications Forms: FilmInformation Provided by Teknor Apex |
|||
Tensile Strength at Break | 17.9 MPa | 2600 psi | ASTM D638 |
A. Schulman POLYTROPE™ TPP 524E Extrusion Grade Olefinic Thermoplastic Elastomer DescriptionPolytrope TPP 524E is an extrusion grade olefinic thermoplastic elastomer. This mineral filled product is suited for profile extrusion or blow molding. TPP 524E is paintable and can be .. |
|||
Tensile Strength at Break | 17.9 MPa | 2600 psi | at 2.0 in/min; ASTM D638 |
Chevron Phillips EA6740 Rubber Modified Polystyrene DescriptionChevron EA6740 is a high impact polystyrene material developed for packaging applications. Its processing characteristics make EA6740 excellent for extrusion and deep-draw thermoforming... |
|||
Tensile Strength at Break | 17.9 MPa | 2600 psi | Molded and tested in accordance with ASTM D4976; ASTM D638 |
Dow DMDA-8007 NT 7 High Density Polyethylene Resin DOW DMDA-8007 NT is a narrow molecular weight distribution high density homopolymer designed to offer excellent stiffness, low warpage, good/acceptable toughness, and good mold-ability. This resin .. |
|||
Tensile Strength at Break | 17.9 MPa | 2600 psi | ASTM D412 |
Compuestos Dominicanos Polycom VY-050775 PVC Compound The Polycom VY series are compounds for the extrusion of both stripes for chaise lounge and flexible window sidings with outstanding weather and outdoes resistance. Also, in the VY series the are p.. |
|||
Tensile Strength at Break | 17.9 MPa | 2590 psi | ASTM D3759 |
3M Scotch® 4735 High Temperature Fine Line Tape Scotch® High Temperature Fine Line Tape 4735 is a vinyl fine line paint masking tape for fascia, rocker panels, two-tone and other multiple color applications where critical paint break lines are r.. |
|||
Tensile Strength at Break | 17.9 MPa | 2600 psi | Type IV, 510 mm/min; ASTM D638 |
PolyOne Syncure™ S1027A Polyethylene, Crosslinked (XLPE) Moisture Crosslinkable Polyethylene Compound. Available as Base Resin component for PolyOne Syncure System.Tensile, Oven Aging, measured on a 100 phr S1027A / 20 phr V0022G system. Deformation, Hot .. |
|||
Tensile Strength at Break | 17.9 MPa | 2600 psi | ASTM D638 |
ExxonMobil Paxon™ AG45-004 Blow Molding Resin
(discontinued **) AG45-004 is a blow molding high density polyethylene which offers exceptional stress crack resistance and impact performance. It contains an antistat which permits this resin to be used in all food.. |