Amity Thermosets ATR 126 Phenolic Molding Organic Filler, Injection Molded

Category	Polymer , Thermoset , Filled/Reinforced Thermoset , Phenolic
Manufacturer	Amity Thermosets
Trade Name
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Amity Thermosets ATR 126 Phenolic Molding Organic Filler, Injection Molded.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Characteristics:Ammonia freeGood mouldabilityGood mechanical strengthGood electrical insulationGood surface finishMedium thermal stability Color-black, brownSoft flow Applications:Telecommunication equipment partsAutomotive electrical parts Moulding which remain in contact with metal partsElectric switchgear components ( eg. relay )Components exposed to warm atmosphere, etc. Information provided by Amity Thermosets Limited

Physical Properties	Metric	English	Comments
Density	1.32 - 1.37 g/cc	0.0477 - 0.0495 lb/in³	Molding; IS 867-1963
Apparent Bulk Density	0.600 - 0.680 g/cc	0.0217 - 0.0246 lb/in³	IS 867-1963
Water Absorption	0.20 - 0.40 %	0.20 - 0.40 %	IS 13411-1993
Linear Mold Shrinkage	0.0075 - 0.0090 cm/cm	0.0075 - 0.0090 in/in	IS 13411-1992

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	46.0 - 55.0 MPa	6670 - 7980 psi	5 mm/min.; IS 867-1963
Shear Strength	66.0 - 75.0 MPa	9570 - 10900 psi	2mm/min.; IS 867-1963
Izod Impact, Notched	0.220 - 0.300 J/cm	0.412 - 0.562 ft-lb/in	IS 13411-1992

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+11 - 3.16e+11 ohm-cm	1.00e+11 - 3.16e+11 ohm-cm	IS 3396-1979
Surface Resistance	1.00e+10 - 3.16e+10 ohm	1.00e+10 - 3.16e+10 ohm	IS 3396-1979
Dielectric Strength	5.00 - 7.00 kV/mm @Temperature 90.0 °C	127 - 178 kV/in @Temperature 194 °F	IS 2584-1963

Processing Properties	Metric	English	Comments
Rear Barrel Temperature	65.0 - 85.0 °C	149 - 185 °F
Front Barrel Temperature	85.0 - 95.0 °C	185 - 203 °F
Nozzle Temperature	<= 105 °C	<= 221 °F
Mold Temperature	160 - 180 °C	320 - 356 °F
Injection Pressure	98.0 - 196 MPa	14200 - 28400 psi
Hold Pressure	58.8 MPa	8530 psi
Cure Time	0.200 - 0.333 min	0.00333 - 0.00556 hour	per mm
Shelf Life	1.50 Month	1.50 Month	27-30°C
	4.00 Month	4.00 Month	below 20°C

Users viewing this material also viewed the following: