PolyOne Geon™ Vinyl Rigid Molding M5731 Polyvinyl Chloride, Rigid (PVC, Rigid)

Category	Polymer , Thermoplastic , Vinyl (PVC) , PVC, Rigid Grade
Manufacturer	PolyOne Corporation
Trade Name	Geon™
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	PolyOne Geon™ Vinyl Rigid Molding M5731 Polyvinyl Chloride, Rigid (PVC, Rigid).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

NOTE: Geon weatherable compounds contain pigments and ingredients that, along with processing conditions, contribute to the weathering performance of the PVC compounds. Dark colored compounds do not contain the same level of pigments as light colored compounds. The weathering performance of dark colored compounds generally is inferior to light colored compounds. Therefore, in applications where processors or customers would like to use a dark colored compound, it is the customer's responsibility to determine whether or not the weathering performance is acceptable in their specific end-use application.Information provided by PolyOne

Physical Properties	Metric	English	Comments
Specific Gravity	1.32 g/cc	1.32 g/cc	ASTM D792
Linear Mold Shrinkage, Flow	0.0020 - 0.0050 cm/cm	0.0020 - 0.0050 in/in	ASTM D955
Spiral Flow	88.9 cm	35.0 in

Mechanical Properties	Metric	English	Comments
Hardness, Shore D	79	79	15 sec; ASTM D2240
Tensile Strength, Yield	42.7 MPa	6190 psi	Type I, 51 mm/min; ASTM D638
Elongation at Break	50 %	50 %	Type I, 51 mm/min; ASTM D638
Tensile Modulus	2.34 GPa	339 ksi	Type I, 51 mm/min; ASTM D638
Flexural Strength	71.0 MPa	10300 psi	ASTM D790
Flexural Modulus	2.41 GPa	350 ksi	ASTM D790
Izod Impact, Notched	0.530 J/cm @Thickness 3.18 mm, Temperature -18.0 °C	0.993 ft-lb/in @Thickness 0.125 in, Temperature -0.400 °F	Injection Molded; ASTM D256A
	2.70 J/cm @Thickness 3.18 mm, Temperature 0.000 °C	5.06 ft-lb/in @Thickness 0.125 in, Temperature 32.0 °F	Injection Molded; ASTM D256A
	4.30 J/cm @Thickness 3.18 mm, Temperature 23.0 °C	8.06 ft-lb/in @Thickness 0.125 in, Temperature 73.4 °F	Injection Molded; ASTM D256A

Thermal Properties	Metric	English	Comments
Deflection Temperature at 0.46 MPa (66 psi)	73.9 °C @Thickness 6.35 mm	165 °F @Thickness 0.250 in	Unannealed; ASTM D648
	77.8 °C @Thickness 6.35 mm	172 °F @Thickness 0.250 in	Annealed; ASTM D648
Deflection Temperature at 1.8 MPa (264 psi)	72.2 °C @Thickness 6.35 mm	162 °F @Thickness 0.250 in	Unannealed; ASTM D648
	76.1 °C @Thickness 6.35 mm	169 °F @Thickness 0.250 in	Annealed; ASTM D648
UL RTI, Electrical	50.0 °C	122 °F	UL 746
UL RTI, Mechanical with Impact	50.0 °C	122 °F	UL 746
UL RTI, Mechanical without Impact	50.0 °C	122 °F	UL 746
Flammability, UL94	V-0 @Thickness 1.60 mm	V-0 @Thickness 0.0630 in	ALL; UL 94
	5VA @Thickness 1.91 mm	5VA @Thickness 0.0752 in	ALL; UL 94

Processing Properties	Metric	English	Comments
Melt Temperature	199 - 210 °C	390 - 410 °F

Descriptive Properties	Value	Comments
Features	General Purpose
	High Flow
	Medium Impact Resistance
Forms	Pellets
Generic Material	PVC, Rigid
Generic Name	Polyvinyl Chloride, Rigid (PVC, Rigid)
Regional Availability	Africa & Middle East
	Asia Pacific
	Europe
	North America
	South America
Uses	Construction Applications
	General Purpose
	Outdoor Applications

Users viewing this material also viewed the following: