PolyOne Geon™ Vinyl Rigid Extrusion 87727-0284 Polyvinyl Chloride, Rigid (PVC, Rigid)

Category	Polymer , Thermoplastic , Vinyl (PVC) , PVC, Rigid Grade
Manufacturer	PolyOne Corporation
Trade Name	Geon™
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	PolyOne Geon™ Vinyl Rigid Extrusion 87727-0284 Polyvinyl Chloride, Rigid (PVC, Rigid).pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

The Cell Classification was determined using the notched Izod test with injection molded samples. Physical property testing was based on the Geon® 87727 Trans 0020.Information provided by PolyOne

Physical Properties	Metric	English	Comments
Specific Gravity	1.38 g/cc	1.38 g/cc	ASTM D792

Mechanical Properties	Metric	English	Comments
Hardness, Shore D	85	85	15 sec; ASTM D2240
Tensile Strength, Yield	56.9 MPa	8250 psi	Type I, 5.1 mm/min; ASTM D638
Tensile Modulus	2.87 GPa	416 ksi	Type I, 5.1 mm/min; ASTM D638
Flexural Strength	93.5 MPa	13600 psi	ASTM D790
Flexural Modulus	2.92 GPa	424 ksi	ASTM D790
Izod Impact, Notched	0.160 J/cm @Thickness 3.18 mm, Temperature 23.0 °C	0.300 ft-lb/in @Thickness 0.125 in, Temperature 73.4 °F	Compression Molded, Flow; ASTM D256A
	0.350 J/cm @Thickness 3.18 mm, Temperature 23.0 °C	0.656 ft-lb/in @Thickness 0.125 in, Temperature 73.4 °F	Compression Molded, Across Flow; ASTM D256A
	2.10 J/cm @Thickness 3.18 mm, Temperature 23.0 °C	3.93 ft-lb/in @Thickness 0.125 in, Temperature 73.4 °F	Injection Molded; ASTM D256A
Dart Drop Total Energy	66.3 J/cm @Temperature 23.0 °C	0.124 ft-lb/mil @Temperature 73.4 °F	Procedure A, C.125; ASTM D4226
	175 J/cm @Temperature 23.0 °C	0.328 ft-lb/mil @Temperature 73.4 °F	Procedure B, C.125; ASTM D4226

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	70.0 µm/m-°C	38.9 µin/in-°F	ASTM D696
Deflection Temperature at 1.8 MPa (264 psi)	61.1 °C @Thickness 3.18 mm	142 °F @Thickness 0.125 in	Unannealed; ASTM D648
Flammability, UL94	5VA @Thickness 1.50 mm	5VA @Thickness 0.0591 in	TP; UL 94

Processing Properties	Metric	English	Comments
Melt Temperature	182 - 193 °C	360 - 379 °F

Descriptive Properties	Value	Comments
Appearance	Translucent
Forms	Pellets
Generic Material	PVC, Rigid
Generic Name	Polyvinyl Chloride, Rigid (PVC, Rigid)
Processing Method	Extrusion
PVC Cell Classification	11553	ASTM D1784
Regional Availability	Africa & Middle East
	Asia Pacific
	Europe
	North America
	South America
Uses	Capstock
	Profiles
	Vertical Blinds

Users viewing this material also viewed the following: