- HOME
- POLYMER SEARCH
- Rapid Prototyping Polymer
- Prodways PLASTCure Model 300 3D Printing Polymer
Prodways PLASTCure Model 300 3D Printing Polymer
| Category | Polymer , Rapid Prototyping Polymer |
| Manufacturer | Prodways |
| Trade Name | PLASTCure |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Prodways PLASTCure Model 300 3D Printing Polymer.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Good mechanical properties.Broad range of dental model applications.Information provided by Genistar.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.10 - 1.20 g/cc | 0.0397 - 0.0434 lb/in³ | |
| Viscosity | 2300 - 2500 cP @Temperature 23.0 °C |
2300 - 2500 cP @Temperature 73.4 °F |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore D | 80 - 85 | 80 - 85 | |
| Elongation at Break | 1 - 2.0 % | 1 - 2.0 % | ASTM D638 |
| Tensile Modulus | 1.90 - 2.00 GPa | 276 - 290 ksi | ASTM D638 |
| Flexural Strength | 95.0 - 130 MPa | 13800 - 18900 psi | ASTM D790 |
| Flexural Modulus | 2.15 - 2.40 GPa | 312 - 348 ksi | ASTM D790 |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Appearance | Orange mat |
Users viewing this material also viewed the following:
- Nye Lubricants UniFlor 8512G (842G) (UF) Synthetic Oil
- Premix Thermoplastics PRE-ELEC® CP 1316 (discontinued **)
- Styron DL 220 Plastic Pigment
- Shinkong Synthetic Fibers Shinite® T101G45 PET, 45% Glass Filled
- A. Schulman POLYTROPE™ TPP 608 Olefinic Elastomer
- Wellman Wellamid® MR259 22LH-N 25% Mineral Reinforced Nylon 66, Lubricated & Heat Stabilized
- Covestro Makrolon® 2556 Polycarbonate
- Arlon 51073R031 0.0311" (0.79 mm) Cured Silicone Rubber with Fiberglass Substrate
Copyright © lookpolymers.com All Rights Reserved