Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Plenco 7552 Phenolic, Nodular, Injection Molded

Category Polymer , Thermoset , Filled/Reinforced Thermoset , Phenolic , Phenolic, Novolac, Glass Filled
Manufacturer Plenco (Plastics Engineering Company)
Trade Name
Port Shanghai port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Plenco 7552 Phenolic, Nodular, Injection Molded.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
PLENCO 07552 is a glass fiber reinforced novolac phenolic molding compound, exhibiting superior dimensional stability, good impact strength, and good electrical properties. Type ASTM 5948 MFH. UL recognized under component file E40654.Information supplied by Plenco.
Physical Properties Metric English Comments
Bulk Density 0.670 g/cc
0.0242 lb/in³
ASTM D1895
Density 1.72 g/cc
0.0621 lb/in³
ASTM D792
Water Absorption 0.121 %
0.121 %
ASTM D570
Linear Mold Shrinkage 0.0049 cm/cm
0.0049 in/in
ASTM D955
Mechanical Properties Metric English Comments
Hardness, Rockwell E 81
81
ASTM D785
Tensile Strength, Ultimate 43.0 MPa
6240 psi
ASTM D638
Elongation at Break 0.51 %
0.51 %
ASTM D638
Tensile Modulus 11.7 GPa
1700 ksi
ASTM D638
Flexural Strength 75.0 MPa
10900 psi
ASTM D790
Flexural Modulus 10.3 GPa
1490 ksi
ASTM D790
Compressive Strength 156 MPa
22600 psi
ASTM D695
Poissons Ratio 0.31
0.31
ASTM D638
Shear Modulus 4.47 GPa
648 ksi
Calculated
Izod Impact, Notched 0.340 J/cm
0.637 ft-lb/in
ASTM D256
Charpy Impact, Notched 0.310 J/cm²
1.48 ft-lb/in²
ASTM D256
Impact 188
188
J/m Drop Ball Impact; PLENCO
Thermal Properties Metric English Comments
CTE, linear 35.0 µm/m-°C

@Temperature 40.0 - 130 °C
19.4 µin/in-°F

@Temperature 104 - 266 °F
TMA; ASTM E831
Thermal Conductivity 0.580 W/m-K

@Temperature 100 °C
4.03 BTU-in/hr-ft²-°F

@Temperature 212 °F
ASTM E1461
Maximum Service Temperature, Air 189 °C
372 °F
Heat Resistance; ASTM D570D
Deflection Temperature at 1.8 MPa (264 psi) 261 °C
502 °F
ASTM D648
Flammability, UL94 V-0

@Thickness 1.50 mm
V-0

@Thickness 0.0591 in
Oxygen Index 46 %
46 %
ASTM D2863
Shrinkage 0.103 %
0.103 %
72 hr, 120ºC; ASTM D1299
Electrical Properties Metric English Comments
Volume Resistivity 2.60e+12 ohm-cm
2.60e+12 ohm-cm
ASTM D247
Dielectric Constant 4.9
4.9
ASTM D150
Dielectric Strength 13.6 kV/mm
345 kV/in
Short Time; ASTM D149
Dissipation Factor 0.039
0.039
ASTM D150
Arc Resistance 184 sec
184 sec
ASTM D495
Comparative Tracking Index 200 V
200 V
ASTM D3638
Copyright © lookpolymers.com All Rights Reserved