- HOME
- POLYMER SEARCH
- Thermoplastic
- ABS Polymer
- Acrylonitrile Butadiene Styrene (ABS), Molded
- PlastxWorld CEVIAN®-V T180 ABS
PlastxWorld CEVIAN®-V T180 ABS
| Category | Polymer , Thermoplastic , ABS Polymer , Acrylonitrile Butadiene Styrene (ABS), Molded |
| Manufacturer | PlastxWorld, Inc. |
| Trade Name | CEVIAN®-V |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | PlastxWorld CEVIAN®-V T180 ABS.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
High Modulus ABSThese are typical values and are not intended for specification purposes. UL approved file No. is E47773. Information provided by PlastxWorld Inc.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.07 g/cc | 0.0387 lb/in³ | ASTM D792 |
| Water Absorption | 0.30 % | 0.30 % | 24 hr; ASTM D570 |
| Linear Mold Shrinkage | 0.0040 - 0.0060 cm/cm | 0.0040 - 0.0060 in/in | ASTM D955 |
| Melt Flow | 12 g/10 min @Load 3.80 kg, Temperature 230 °C |
12 g/10 min @Load 8.38 lb, Temperature 446 °F |
ASTM D1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell R | 112 | 112 | ASTM D785 |
| Tensile Strength, Yield | 46.9 MPa | 6800 psi | ASTM 638 |
| Flexural Yield Strength | 73.8 MPa | 10700 psi | ASTM D790 |
| Flexural Modulus | 2.34 GPa | 340 ksi | ASTM D790 |
| Izod Impact, Notched | 0.908 J/cm @Thickness 6.35 mm |
1.70 ft-lb/in @Thickness 0.250 in |
ASTM D256 |
| 1.07 J/cm @Thickness 3.17 mm |
2.00 ft-lb/in @Thickness 0.125 in |
ASTM D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Deflection Temperature at 1.8 MPa (264 psi) | 86.0 °C | 187 °F | 0.5 inch; ASTM D648 |
| Flammability, UL94 | HB | HB |
| Optical Properties | Metric | English | Comments |
|---|---|---|---|
| Haze | 4.0 % | 4.0 % | |
| Transmission, Visible | 88 % | 88 % |
Users viewing this material also viewed the following:
- Polimeri Europa Extir® LN 7000 Expandable Polystyrene
- Overview of materials for Polycarbonate, Optical Grade
- KKPC Kuhmo GP 150K High Heat Resistant, High Rigidity GPPS
- SABIC Innovative Plastics NORYL HNA033 PPE+HIPS (Europe-Africa-Middle East)
- Suzhou Hipro Polymers Hiprolon® 11ESNNHL P40 Nylon, dry
- UBE UBEPOL BR100 Non-Oil Extended Synthetic Rubber Vulcanizate (Cured 50 Minutes at 145°C)
- Trelleborg Sealing Solutions HiMod® 912 Thermoplastic Bearing
- Covestro Desmopan® DP 9873DU Polyurethane
- Covestro Makrolon® Rx1805 Polycarbonate
- ChevronTexaco Delo® 300 Motor Oil, SAE 30
Copyright © lookpolymers.com All Rights Reserved