POLYMER SEARCH

Murtfeldt Murinyl® Polyvinylidinefluoride

Category	Polymer , Thermoplastic , Fluoropolymer , PVDF , Polyvinylidinefluoride (PVDF), Molded/Extruded
Manufacturer	Murtfeldt Kunststoffe GmbH & Co
Trade Name	Murinyl®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Murtfeldt Murinyl® Polyvinylidinefluoride.pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

As a fluorinated plastic, Murinyl® is exceptionally resistant to chemicals, hydrolysis, and sterilization. Its properties change very little at high service temperatures and after long-term exposure to UV radiation. This material is ideally suited for use in the food sector and medical industry.Special Properties:• Good wear resistance• Good rigidity• High compressive strength• High constant service temperature• Good resistance to chemicals• Resistant to sterilization• No stress corrosion possible• Very good resistance to UV rays and adverse weather conditions• No moisture absorption• Approved for use in the food industry (EU and FDA)Information provided by Murtfeldt Kunststoffe GmbH & Co. KG.

Physical Properties	Metric	English	Comments
Density	1.79 g/cc	0.0647 lb/in³	ISO 1183-1
Moisture Absorption at Equilibrium	0.010 % @Temperature 23.0 °C	0.010 % @Temperature 73.4 °F	50% RH
Water Absorption at Saturation	0.050 % @Temperature 23.0 °C	0.050 % @Temperature 73.4 °F

Mechanical Properties	Metric	English	Comments
Hardness, Shore D	78	78	DIN 53505
Tensile Strength, Yield	50.0 MPa	7250 psi	ISO 527-1/-2
Creep Strength	10.0 MPa	1450 psi	stress leading to 1% elongation; ISO 899-1
Modulus of Elasticity	2.30 GPa	334 ksi
Compressive Yield Strength	17.0 MPa @Strain 1.00 %	2470 psi @Strain 1.00 %	dry; ISO 604
	32.0 MPa @Strain 2.00 %	4640 psi @Strain 2.00 %	dry; ISO 604
Charpy Impact Unnotched	NB	NB	ISO 179
Charpy Impact, Notched	1.00 J/cm²	4.76 ft-lb/in²	ISO 179-1/1eA
Coefficient of Friction, Dynamic	0.35	0.35
Sand Slurry	21	21	µm/km

Thermal Properties	Metric	English	Comments
CTE, linear	125 µm/m-°C @Temperature 23.0 - 60.0 °C	69.4 µin/in-°F @Temperature 73.4 - 140 °F
	140 µm/m-°C @Temperature 23.0 - 100 °C	77.8 µin/in-°F @Temperature 73.4 - 212 °F
Melting Point	175 °C	347 °F	ISO 11357-1
Maximum Service Temperature, Air	150 °C @Time 7.20e+7 sec	302 °F @Time 20000 hour
	160 °C @Time <=86400 sec	320 °F @Time <=24.0 hour
Minimum Service Temperature, Air	-50.0 °C	-58.0 °F
Flammability, UL94	V-0	V-0

Electrical Properties	Metric	English	Comments
Electrical Resistivity	1.00e+14 ohm-cm	1.00e+14 ohm-cm	IEC 60093
Surface Resistance	1.00e+13 ohm	1.00e+13 ohm	IEC 60093
Dielectric Constant	6.0 @Frequency 1.00e+6 Hz	6.0 @Frequency 1.00e+6 Hz	IEC 60250
	7.4 @Frequency 100 Hz	7.4 @Frequency 100 Hz	IEC 60250
Dielectric Strength	18.0 kV/mm	457 kV/in	IEC 60243-1
Dielectric Loss Index	0.025 @Frequency 100 Hz	0.025 @Frequency 100 Hz	IEC 60250
	0.165 @Frequency 1.00e+6 Hz	0.165 @Frequency 1.00e+6 Hz	IEC 60250

Compliance Properties	Metric	English	Comments
FDA	Yes	Yes

Descriptive Properties	Value	Comments
Color	Natural

Users viewing this material also viewed the following: