- HOME
- POLYMER SEARCH
- Thermoplastic
- Elastomer, TPE
- Thermoplastic Elastomer, Melt-Processible Rubber
- Multibase Multi-Flex® TPE A 7101 BLK
Multibase Multi-Flex® TPE A 7101 BLK
| Category | Polymer , Thermoplastic , Elastomer, TPE , Thermoplastic Elastomer, Melt-Processible Rubber |
| Manufacturer | Multibase |
| Trade Name | Multi-Flex® TPE |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Multibase Multi-Flex® TPE A 7101 BLK.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Ash is 36.2%. Multi-Flex TPE contains Kraton™ G.Data provided by Multibase.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.19 g/cc | 0.0430 lb/in³ | ASTM D792 |
| Linear Mold Shrinkage | 0.011 cm/cm | 0.011 in/in | ASTM D955 |
| Melt Flow | 1.8 g/10 min | 1.8 g/10 min | (Condition L) ASTM D-1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 69 | 69 | 10 sec; ASTM D-2240 |
| Tensile Strength, Ultimate | 8.17 MPa | 1180 psi | ASTM D412 |
| Elongation at Break | 711 % | 711 % | ASTM D412 |
| 100% Modulus | 0.00250 GPa | 0.363 ksi | ASTM D412 |
| 300% Modulus | 0.00120 GPa | 0.174 ksi | ASTM D412 |
| Tear Strength | 34.1 kN/m | 195 pli | ASTM D624 |
Users viewing this material also viewed the following:
- Chevron Phillips Ryton® P-4-60 Polyphenylene Sulfide Resin (discontinued **)
- Ferro IP 780 Passivation Glasses (Pb-B-Si-Al; Pb-Si-Al; Si-Pb-Al Silicates)
- Huntsman HT 9690 Special Hardener
- SABIC Innovative Plastics LNP Lubricomp PFL34 PA 6
- A. Schulman FORMION™ FI 301 Ionomer
- A. Schulman FORMION™ FI 231 5% Mineral Reinforced Ionomer / Nylon Alloy
- Hexcel® HexWeb® HRH-78 - 1/8 - 3.0 Commercial Grade Nomex Honeycomb/Phenolic Resin
- Chevron Phillips MC3700 Crystal Polystyrene
- Bapolene® 200B Polyethylene, Film Extrusion
- Permabond MH052 Anaerobic Threadsealant
Copyright © lookpolymers.com All Rights Reserved