- HOME
- POLYMER SEARCH
- Thermoset
- Silicone
- Silicone, RTV, Adhesive/Sealant Grade
- Momentive Performance Materials RTV6803 Black Adhesive Sealant, Industrial Plastic Adhesive
Momentive Performance Materials RTV6803 Black Adhesive Sealant, Industrial Plastic Adhesive
| Category | Polymer , Adhesive , Thermoset , Silicone , Silicone, RTV, Adhesive/Sealant Grade |
| Manufacturer | Momentive Performance Materials (Former GE Silicones) |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Momentive Performance Materials RTV6803 Black Adhesive Sealant, Industrial Plastic Adhesive.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
One-part modified alkoxy cure. Modified alkoxy materials cure at room temperature and will outgas a small amount of ammonia and some alcohol during cure. Typical uses: Primerless adhesion to many metals and plastics including polycarbonate for assembly bonding and sealing.Data provided by the manufacturer, GE Silicones.GE Silicones became a part of Momentive Performance Materials in 2006.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.04 g/cc | 0.0376 lb/in³ |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 18 | 18 | |
| Tensile Strength, Ultimate | 1.67 MPa | 242 psi | |
| Elongation at Break | 400 % | 400 % | |
| Adhesive Bond Strength | 0.830 MPa | 120 psi | Typical lap shear |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Maximum Service Temperature, Air | 205 °C | 401 °F | Continuous useful temperature. |
| Minimum Service Temperature, Air | -60.0 °C | -76.0 °F | Continuous useful temperature. |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Dielectric Constant | 2.8 @Frequency 100 Hz |
2.8 @Frequency 100 Hz |
|
| Dielectric Strength | 19.5 kV/mm | 495 kV/in |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Processing Temperature | 25.0 °C | 77.0 °F |
Users viewing this material also viewed the following:
- LyondellBasell Plexar® PX3216 Extrudable Tie-Layer Resin, Anhydride Modified LLDPE
- LyondellBasell Higlass SB224-3 Polypropylene Copolymer, 30% Glass Fiber
- Schott BG7 Band Pass Filter
- Sylvin Technologies 9999-70 Natural PVC Molding Compound
- SABIC Innovative Plastics Valox® AB9530 ABS+PBT (Asia Pacific)
- Styron XZ 97217.00 Styrene Acrylate
- Braskem S1522 LDPE Blow Molding Polyethylene
- Ashley Polymers Ashlene® P268WO PPO
- Albis Plastics Cellulose Acetate CA700 , Unreinforced, 25% Plasticizer (discontinued **)
Copyright © lookpolymers.com All Rights Reserved