- HOME
- POLYMER SEARCH
- Thermoset
- Silicone
- Silicone, RTV, Encapsulation Grade
- Momentive Performance Materials RTV6126 Clear Potting/Encapsulating Gel
Momentive Performance Materials RTV6126 Clear Potting/Encapsulating Gel
| Category | Polymer , Thermoset , Rubber or Thermoset Elastomer (TSE) , Silicone , Silicone, RTV, Encapsulation Grade |
| Manufacturer | Momentive Performance Materials (Former GE Silicones) |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Momentive Performance Materials RTV6126 Clear Potting/Encapsulating Gel.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Two-part addition cure. Two-part addition cure RTV silicones can be cured very quickly with the use of high heat. Addition cure products have no cure by-products and can be used to unlimited depths. Typical uses: GP with very fast cure without heat and automated meter/mixing equipment.Data provided by the manufacturer, GE Silicones.GE Silicones became a part of Momentive Performance Materials in 2006.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 0.980 g/cc | 0.0354 lb/in³ | |
| Viscosity | 750 cP @Temperature 25.0 °C |
750 cP @Temperature 77.0 °F |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 270 µm/m-°C @Temperature 20.0 °C |
150 µin/in-°F @Temperature 68.0 °F |
|
| Thermal Conductivity | 0.190 W/m-K | 1.32 BTU-in/hr-ft²-°F | |
| Maximum Service Temperature, Air | 204 °C | 399 °F | Continuous useful temperature. |
| Minimum Service Temperature, Air | -50.0 °C | -58.0 °F | Continuous useful temperature. |
| Optical Properties | Metric | English | Comments |
|---|---|---|---|
| Refractive Index | 1.41 | 1.41 | |
| Transmission, Visible | 90 % | 90 % | clear; thickness not quantified |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Electrical Resistivity | 1.00e+15 ohm-cm | 1.00e+15 ohm-cm | |
| Dielectric Constant | 2.8 @Frequency 1000 Hz |
2.8 @Frequency 1000 Hz |
|
| Dielectric Strength | 20.5 kV/mm @Thickness 1.91 mm |
521 kV/in @Thickness 0.0750 in |
|
| Dissipation Factor | 0.0010 @Frequency 1000 Hz |
0.0010 @Frequency 1000 Hz |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Processing Temperature | 25.0 °C | 77.0 °F | Cure time 5 min. |
| Pot Life | 5.00 min @Temperature 25.0 °C |
5.00 min @Temperature 77.0 °F |
Users viewing this material also viewed the following:
- Plaskolite West Optix® CP - 927 High Impact Acrylic Resin
- Polimeri Europa Greenflex® FD 50 Ethylene Vinyl Acetate Copolymer - Blown Film Extrusion
- 3M Dyneon™ THV 500A Fluorothermoplastic (discontinued **)
- Hardwire 3SX-21.5-12 High Density Tape
- SABIC Innovative Plastics LNP STAT-KON Noryl_NC3508 PPE+HIPS (Europe-Africa-Middle East)
- ThyssenKrupp 75Cr1 Saw Steel, Hot-Rolled Strip
- A. Schulman POLYFORT™ FPP 892E Extrusion and Blow Molding Grade Homopolymer Polypropylene
- Chesterton 338 Super Rust Remover
- Azoty Tarnow™ TARNOFORM 400 POM
- BASF Elastollan C 75 A HPM TPUR
Copyright © lookpolymers.com All Rights Reserved