- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyphenylene Ether/PPO
- Polyphenylene Ether, Molded
- LG Chemical LUMILOY GN1006F Injection Molding FR mPPO
LG Chemical LUMILOY GN1006F Injection Molding FR mPPO
| Category | Polymer , Thermoplastic , Polyphenylene Ether/PPO , Polyphenylene Ether, Molded |
| Manufacturer | LG Chemical |
| Trade Name | LUMILOY |
| Port | Ningbo port,China |
| Trade Terms | EXW, FOB, CFR, CIF |
| Payment Terms | L/C, T/T, PayPal |
| Download PDF | LG Chemical LUMILOY GN1006F Injection Molding FR mPPO.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Uses include electric/electronic parts.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.07 g/cc | 0.0387 lb/in³ | ASTM D792 |
| Water Absorption | 0.3 % <br>@Time 86400 sec |
0.3 % <br>@Time 24.0 hour |
ASTM D570 |
| Melt Flow | 5.0 g/10 min <br>@Load 5.00 kg,<br> Temperature 200 °C |
5.0 g/10 min <br>@Load 11.0 lb,<br> Temperature 392 °F |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Yield | 41.2 MPa <br>@Thickness 3.20 mm |
5970 psi <br>@Thickness 0.126 in |
ASTM D638 |
| Elongation at Break | 25 % <br>@Thickness 3.17 mm |
25 % <br>@Thickness 0.125 in |
ASTM D638 |
| Flexural Strength | 62.8 MPa <br>@Thickness 3.20 mm |
9110 psi <br>@Thickness 0.126 in |
ASTM D790 |
| Flexural Modulus | 2.26 GPa <br>@Thickness 3.20 mm |
327 ksi <br>@Thickness 0.126 in |
ASTM D790 |
| Izod Impact, Notched | 1.18 J/cm <br>@Thickness 3.20 mm |
2.20 ft-lb/in <br>@Thickness 0.126 in |
ASTM D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Deflection Temperature at 1.8 MPa (264 psi) | 77.0 °C <br>@Thickness 3.20 mm |
171 °F <br>@Thickness 0.126 in |
Unannealed; ASTM D648 |
| Flammability, UL94 | V-2 <br>@Thickness 1.50 mm |
V-2 <br>@Thickness 0.0591 in |
|
| V-2 <br>@Thickness 3.00 mm |
V-2 <br>@Thickness 0.118 in |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Rear Barrel Temperature | 210 - 240 °C | 410 - 464 °F | |
| Middle Barrel Temperature | 220 - 250 °C | 428 - 482 °F | |
| Front Barrel Temperature | 220 - 250 °C | 428 - 482 °F | |
| Nozzle Temperature | 210 - 240 °C | 410 - 464 °F | |
| Mold Temperature | 50.0 - 70.0 °C | 122 - 158 °F | |
| Drying Temperature | 55 - 70.0 °C | 130 - 158 °F | |
| Dry Time | 2 - 4 hour | 2 - 4 hour | |
| Moisture Content | >= 0.01 % | >= 0.01 % |
Users viewing this material also viewed the following:
- Plastcom SLOVALEN PC 51 C 40 LS/1M Polypropylene reinforced with mineral filler, UV stabilized
- Garlock 9850 Compressed Carbon Fiber Gasketing, Nitrile Binder
- Global NPP-130-C Glass/Talc Filled Polypropylene
- A. Schulman POLYBATCH™ Green 3012E Concentrate Based In Polyethylene
- Dow Nordel® IP 4640 Low Cost General Purpose Hose
- Asahi Kasei Tenac®-C 5520 Copolymer Acetal Resin
- TSE Industries Millathane® 76 Millable Polyester Polyurethane Rubber
- Rogers Corporation 3001 Thermoplastic Chloro-Fluorocopolymer Bonding Film
Copyright © lookpolymers.com All Rights Reserved