- HOME
- POLYMER SEARCH
- Thermoplastic
- Nylon
- Nylon 66
- Nylon 66, Unreinforced
- Kolon KOPA® KN333HRBL Heat Resistant Nylon 66
Kolon KOPA® KN333HRBL Heat Resistant Nylon 66
| Category | Polymer , Thermoplastic , Nylon , Nylon 66 , Nylon 66, Unreinforced |
| Manufacturer | Kolon |
| Trade Name | Kopa® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Kolon KOPA® KN333HRBL Heat Resistant Nylon 66.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Middle viscosity, BLACKApplications A variety of reservoir tanks and housingsInformation provided by API-Kolon.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.14 g/cc | 1.14 g/cc | ASTM D792 |
| Moisture Absorption at Equilibrium | 1.3 % | 1.3 % | 60% RH; ASTM D570 |
| Linear Mold Shrinkage | 0.011 - 0.013 cm/cm | 0.011 - 0.013 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell R | 120 | 120 | ASTM D785 |
| Tensile Strength | 85.0 MPa | 12300 psi | ASTM D638 |
| Elongation at Break | 40 % | 40 % | ASTM D638 |
| Flexural Strength | 123 MPa | 17800 psi | ASTM D790 |
| Flexural Modulus | 2.746 GPa | 398.3 ksi | ASTM D790 |
| Izod Impact, Notched | 0.590 J/cm | 1.11 ft-lb/in | ASTM D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 70.0 µm/m-°C | 38.9 µin/in-°F | ASTM D696 |
| Melting Point | 255 °C | 491 °F | ASTM D1525 |
| Deflection Temperature at 0.46 MPa (66 psi) | 235 °C | 455 °F | ASTM D648 |
| Deflection Temperature at 1.8 MPa (264 psi) | 85.0 °C | 185 °F | ASTM D648 |
| Flammability, UL94 | V-2 | V-2 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Dielectric Constant | 3.3 | 3.3 | ASTM D150 |
| Dielectric Strength | 20.0 kV/mm | 508 kV/in | ASTM D149 |
| Arc Resistance | 128 sec | 128 sec | ASTM D495 |
Users viewing this material also viewed the following:
- DuPont™ Sclairfilm® LX-1 LLDPE Film, Laminating, 50.8 µm Thickness (discontinued **)
- Nilit FRIANYL B63 V0 Nylon 6.6 for injection molding
- Kennametal Stellite Deloro® 45 Nickel Alloy
- Techmer ES Electrafil® J-1/CF/40 BK PA66
- SABIC Innovative Plastics NORYL IGN5531 PPE+PS
- Teknor Apex Telcar® TL-1336G Thermoplastic Elastomer
- A. Schulman POLYFORT™ PP 3719 Impact Copolymer Polypropylene
- Westlake EM800AA Low Density Polyethylene
- EMS-Grivory Grivory® EBV-15H black 9697 PA6-GF15
- Alliance Polymers Zythane™ 4085A Thermoplastic Polyurethane Elastomer
Copyright © lookpolymers.com All Rights Reserved