- HOME
- POLYMER SEARCH
- Thermoplastic
- Nylon
- Nylon 66
- Nylon 66, 30% Glass Fiber Filled
- Kolon KOPA® KN333G30HS G/F Reinforced Nylon 66
Kolon KOPA® KN333G30HS G/F Reinforced Nylon 66
| Category | Polymer , Thermoplastic , Nylon , Nylon 66 , Nylon 66, 30% Glass Fiber Filled |
| Manufacturer | Kolon |
| Trade Name | Kopa® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Kolon KOPA® KN333G30HS G/F Reinforced Nylon 66.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
High thermal resistant, high strength, dimensionally stableApplications Transmission gear supportersInformation provided by API-Kolon.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.36 g/cc | 1.36 g/cc | ASTM D792 |
| Moisture Absorption at Equilibrium | 0.40 % | 0.40 % | 60% RH; ASTM D570 |
| Linear Mold Shrinkage | 0.0030 - 0.0070 cm/cm | 0.0030 - 0.0070 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell R | 121 | 121 | ASTM D785 |
| Tensile Strength | 181 MPa | 26300 psi | ASTM D638 |
| Elongation at Break | 9.0 % | 9.0 % | ASTM D638 |
| Flexural Strength | 284 MPa | 41200 psi | ASTM D790 |
| Flexural Modulus | 8.63 GPa | 1250 ksi | ASTM D790 |
| Izod Impact, Notched | 1.08 J/cm | 2.02 ft-lb/in | ASTM D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 20.0 µm/m-°C | 11.1 µin/in-°F | ASTM D696 |
| Melting Point | 255 °C | 491 °F | ASTM D1525 |
| Deflection Temperature at 0.46 MPa (66 psi) | 250 °C | 482 °F | ASTM D648 |
| Deflection Temperature at 1.8 MPa (264 psi) | 247 °C | 477 °F | ASTM D648 |
| Flammability, UL94 | HB | HB |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Dielectric Constant | 3.6 | 3.6 | ASTM D150 |
| Dielectric Strength | 21.0 kV/mm | 533 kV/in | ASTM D149 |
| Arc Resistance | 135 sec | 135 sec | ASTM D495 |
Users viewing this material also viewed the following:
- MV Labs ZN200 ZnBr2 Zinc bromide
- Plastcom SLOVAMID 66 GF 15 002/1M PA66 reinforced with glass fiber
- PolyOne Versollan™ OM 1255NX-9 Thermoplastic Elastomer (TPE)
- Advanced Elastomer Systems Santoprene® 181-55 Thermoplastic Rubber (discontinued **)
- Inno-Comp INNOPOL® CS 2-8000 Polypropylene Block-Copolymer
- Monmouth Rubber & Plastics Durafoamâ„¢ C41NBR Nitrile Rubber
- Sekisui PIOCELAN OP-E30ENS (Antistatic) Moldable Polymer Foam
- Techmer ES HiFill FR® ABS GF30 FR 30% Glass Filled
- ChevronTexaco Sugartex® Heavy
- Arlon 55133R062 0.0622" (1.58 mm) Cured Silicone Rubber with Fiberglass Substrate
Copyright © lookpolymers.com All Rights Reserved