- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyurethane, TP
- Thermoplastic Polyurethane, Elastomer, Polyester Grade
- Kolon ELLAS K-470A Ester Based Thermoplastic Polyurethane
Kolon ELLAS K-470A Ester Based Thermoplastic Polyurethane
| Category | Polymer , Thermoplastic , Elastomer, TPE , Polyurethane, TP , Thermoplastic Polyurethane, Elastomer, Polyester Grade |
| Manufacturer | Kolon |
| Trade Name | ELLAS |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Kolon ELLAS K-470A Ester Based Thermoplastic Polyurethane.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
ApplicationsInjectionIndustry PartsParts for Automobile/Mobile phoneABS Compound
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.19 g/cc | 1.19 g/cc | ASTM D792 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 78 | 78 | ASTM D2240 |
| Tensile Strength | 47.1 MPa | 6830 psi | ASTM D412 |
| Tensile Stress | 4.90 MPa @Strain 100 % |
711 psi @Strain 100 % |
ASTM D412 |
| Elongation at Break | 550 % | 550 % | ASTM D412 |
| Tear Strength | 108 kN/m | 616 pli | ASTM D624 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Nozzle Temperature | 175 - 185 °C | 347 - 365 °F | Injection Molding |
| Zone 1 | 155 - 175 °C | 311 - 347 °F | Extrusion Molding |
| 160 - 175 °C | 320 - 347 °F | Injection Molding | |
| Zone 2 | 165 - 180 °C | 329 - 356 °F | Injection Molding |
| 170 - 180 °C | 338 - 356 °F | Extrusion Molding | |
| Zone 3 | 175 - 190 °C | 347 - 374 °F | Injection Molding |
| 180 - 190 °C | 356 - 374 °F | Extrusion Molding | |
| Zone 4 | 185 - 195 °C | 365 - 383 °F | Extrusion Molding |
| Die Temperature | 185 - 195 °C | 365 - 383 °F | Extrusion Molding |
| Head Temperature | 190 - 200 °C | 374 - 392 °F | Extrusion Molding |
Users viewing this material also viewed the following:
- Plaskolite West Optix® CA - 51 HF OG General Purpose Acrylic Resin
- NYCOA 5033 HST 33% Glass-Fiber Reinforced, Heat Stabilized, Translucent Nylon 66 Resin
- Resinoid 1363 Phenolic Molding, Glass Reinforced
- Victrex® PEEK 90G Polyetheretherketone, Unreinforced
- Lehmann & Voss LUVOCOM® 1301-0793 PPS, linear, with glass fiber
- Industeel VIRGO 17.4PH 17Cr-4Ni-3Cu Precipitation Hardening Martensitic Stainless Steel (593°C - 4 hours + air cooled)
- Hexion UP 802 Unsaturated Polyester Resin, High Surface Quality, Low Shrinkage, High Arc Resistance
- EMS-Grivory Grivory® TSS/4 LF 2 PA666
- DuPont Teijin Films Melinex® ST504 Polyester Film, 500 Gauge
Copyright © lookpolymers.com All Rights Reserved