- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyethylene (PE)
- HDPE
- High Density Polyethylene (HDPE), Blow Molding Grade
- JPJ Technologies 5200B HDPE Blow Molding
JPJ Technologies 5200B HDPE Blow Molding
| Category | Polymer , Thermoplastic , Polyethylene (PE) , HDPE , High Density Polyethylene (HDPE), Blow Molding Grade |
| Manufacturer | JPJ Technologies |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | JPJ Technologies 5200B HDPE Blow Molding.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Information provided by JPJ Technologies
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 0.960 g/cc | 0.0347 lb/in³ | |
| Environmental Stress Crack Resistance | 25 hour | 25 hour | |
| Melt Flow | 0.35 g/10 min | 0.35 g/10 min |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength at Break | 23.0 MPa | 3340 psi | |
| Elongation at Break | 800 % | 800 % | |
| Izod Impact, Notched | 2.00 J/cm | 3.75 ft-lb/in |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Brittleness Temperature | -70.0 °C | -94.0 °F | Impact Embrittlement |
Users viewing this material also viewed the following:
- Polimeri Europa Dutral® TER 4334 Ethylene - Propylene - Diene Terpolymer
- Chevron Phillips MarFlex® 7105DL Polyethylene; LLDPE (discontinued **)
- Lubriplate SYNAC 100 Diester-Based Synthetic Air Compressor Fluid
- Sawbones Solid Rigid Polyurethane Foam 50 pcf Density
- ELASTO UK Dryflex® 500800S SEBS Based Material, Unfilled Qualities, 80A Hardness, Translucent
- ExxonMobil PPU0180F Polypropylene Homopolymer
- Dow SE SLR-4400 Solution polymerized Styrene Butadiene Rubber (S-SBR)
- Dynasol Solprene® 375 Solution Random SBR
- Overview of materials for Nylon 66, Nucleated
Copyright © lookpolymers.com All Rights Reserved