- HOME
- POLYMER SEARCH
- Thermoplastic
- Fluoropolymer
- PFA
- Polyperfluoroalkoxyethylene, Molded/Extruded
- Isoflon PFA Polyperfluoroalkoxyethylene
Isoflon PFA Polyperfluoroalkoxyethylene
| Category | Polymer , Thermoplastic , Fluoropolymer , PFA , Polyperfluoroalkoxyethylene, Molded/Extruded |
| Manufacturer | Isoflon |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Isoflon PFA Polyperfluoroalkoxyethylene.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Fluoropolymer material specifications.Information provided by Isoflon.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 2.14 - 2.17 g/cc | 2.14 - 2.17 g/cc | ISO 12086 |
| Water Absorption | 0.020 % | 0.020 % | DIN 53 495 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore D | 60 - 65 | 60 - 65 | DIN 53 505 |
| Ball Indentation Hardness | 25.0 - 30.0 MPa | 3630 - 4350 psi | DIN 53 456 |
| Tensile Strength | 25.0 - 30.0 MPa | 3630 - 4350 psi | DIN 53455 |
| Elongation at Break | 250 - 350 % | 250 - 350 % | DIN 53455 |
| Tensile Modulus | 0.600 - 0.700 GPa | 87.0 - 102 ksi | DIN 53457 |
| Coefficient of Friction, Dynamic | 0.25 | 0.25 | on steel |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 130 µm/m-°C @Temperature 20.0 - 100 °C |
72.2 µin/in-°F @Temperature 68.0 - 212 °F |
|
| Thermal Conductivity | 0.220 W/m-K | 1.53 BTU-in/hr-ft²-°F | DIN 52612 |
| Maximum Service Temperature, Air | 260 °C | 500 °F | Continuous |
| Minimum Service Temperature, Air | -200 °C | -328 °F | Continuous |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Dielectric Strength | 50.0 - 80.0 kV/mm | 1270 - 2030 kV/in | DIN 53481 |
Users viewing this material also viewed the following:
- NOVA Chemicals Gedexcel® 65XA Expandable Polystyrene
- SABIC Innovative Plastics LNP THERMOTUF R1000I PA 66
- DSM Akulon® XP36-C1 PA6
- Chosun Refractories C18CX Magnesia Carbon Brick for Converter
- Dow Corning Z-6020 SILANE
- Adell BT-13 Nylon 6, 15% Glass Reinforced; Impact Modified
- Carpenter 20Cb-3® Stainless Steel, Bar, Annealed at 1750°F (955°C) then Water Quenched
- Teknor Apex Sinvicomp DBS 8615 Polyvinyl Chloride, Rigid
- DuPont Performance Polymers Zytel® RS 3261THSL BK041A Nylon 610 (Unverified Data**)
Copyright © lookpolymers.com All Rights Reserved