Guarniflon PTFE G458 Polytetrafluoroethylene 60% Bronze, 2% Carbon

Category	Polymer , Thermoplastic , Fluoropolymer , PTFE , Polytetrafluoroethylene (PTFE), Bronze Filled
Manufacturer	Guarniflon
Trade Name
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Guarniflon PTFE G458 Polytetrafluoroethylene 60% Bronze, 2% Carbon.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

PTFE G Standard Compound with bronzeProperties: Enhanced compressive strength. Good wear resistance and high thermal conductivity.Application: Unlubricated bearings for high speed excluding hard surfacesInformation provided by Guarniflon®

Physical Properties	Metric	English	Comments
Density	3.80 - 3.88 g/cc	0.137 - 0.140 lb/in³	extruded; ASTM D792
	3.80 - 3.90 g/cc	0.137 - 0.141 lb/in³	molded; ASTM D792
Deformation	1.5 - 2.5 % @Pressure 13.7 MPa, Time 86400 sec	1.5 - 2.5 % @Pressure 1990 psi, Time 24.0 hour	after 24hr relaxation; ASTM D621
	5.0 - 6.0 % @Pressure 13.7 MPa, Time 86400 sec	5.0 - 6.0 % @Pressure 1990 psi, Time 24.0 hour	ASTM D621

Mechanical Properties	Metric	English	Comments
Hardness, Shore D	65 - 70	65 - 70	molded; ASTM D2240
	65 - 70	65 - 70	extruded; ASTM D2240
Tensile Strength	>= 13.0 MPa	>= 1890 psi	extruded; ASTM D4894, ASTM D4745
	17.0 - 23.0 MPa	2470 - 3340 psi	molded; ASTM D4894, ASTM D4745
Elongation at Break	>= 80 %	>= 80 %	extruded; ASTM D4745
	100 - 160 %	100 - 160 %	molded; ASTM D4894
Compressive Yield Strength	10.0 - 11.0 MPa @Strain 1.00 %	1450 - 1600 psi @Strain 1.00 %	ASTM D695
Coefficient of Friction, Dynamic	0.13	0.13	ASTM D1894
K (wear) Factor	>= 10.0 x 10^-8 mm³/N-M	>= 4.96 x 10^-10 in³-min/ft-lb-hr	at PV 100; ASTM D3702

Thermal Properties	Metric	English	Comments
CTE, linear	80.0 - 90.0 µm/m-°C	44.4 - 50.0 µin/in-°F	ASTM D696
Maximum Service Temperature, Air	260 °C	500 °F
Minimum Service Temperature, Air	-200 °C	-328 °F

Users viewing this material also viewed the following: