Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Fiberfil® PP-60/TC/13 BL8860 Polypropylene Homopolymer, 13% Talc Filled

Category Polymer , Thermoplastic , Polypropylene (PP)
Manufacturer FiberFil
Trade Name
Port Shanghai port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Fiberfil® PP-60/TC/13 BL8860 Polypropylene Homopolymer, 13% Talc Filled.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
Information provided by FIBERFIL Engineered Plastics
Physical Properties Metric English Comments
Specific Gravity 1.01 g/cc
1.01 g/cc
ASTM D792
Water Absorption 0.030 %
0.030 %
24 hr; ASTM D570
Linear Mold Shrinkage 0.013 cm/cm

@Thickness 3.17 mm
0.013 in/in

@Thickness 0.125 in
ASTM D955
0.020 cm/cm

@Thickness 6.35 mm
0.020 in/in

@Thickness 0.250 in
ASTM D955
0.030 cm/cm

@Thickness 12.7 mm
0.030 in/in

@Thickness 0.500 in
ASTM D955
Melt Flow 13 g/10 min
13 g/10 min
230/2.16 (typical); ASTM D1238
Mechanical Properties Metric English Comments
Hardness, Rockwell R 90 - 95
90 - 95
ASTM D785
Tensile Strength, Yield 33.8 MPa
4900 psi
ASTM D638
Elongation at Yield 25 %
25 %
ASTM D638
Tensile Modulus 2.34 GPa
340 ksi
ASTM D638
Flexural Strength 48.3 MPa
7000 psi
ASTM D790
Flexural Modulus 2.21 GPa
320 ksi
Tangent; ASTM D790
Izod Impact, Notched 0.267 J/cm

@Thickness 3.17 mm
0.500 ft-lb/in

@Thickness 0.125 in
ASTM D256
Thermal Properties Metric English Comments
Deflection Temperature at 0.46 MPa (66 psi) 132 °C
270 °F
ASTM D648
Deflection Temperature at 1.8 MPa (264 psi) 85.0 °C
185 °F
ASTM D648
Processing Properties Metric English Comments
Rear Barrel Temperature 199 - 210 °C
390 - 410 °F
Middle Barrel Temperature 204 - 227 °C
400 - 440 °F
Front Barrel Temperature 182 - 199 °C
360 - 390 °F
Nozzle Temperature 182 - 193 °C
360 - 380 °F
Melt Temperature 199 - 232 °C
390 - 450 °F
Mold Temperature 32.2 - 71.1 °C
90.0 - 160 °F
Drying Temperature 76.7 °C
170 °F
Drying not normally required
Dry Time 2 hour
2 hour
Drying not normally required
Moisture Content <= 0.20 %
<= 0.20 %
recommended for molding
Back Pressure 0.000 - 0.689 MPa
0.000 - 100 psi
Copyright © lookpolymers.com All Rights Reserved