Ensinger TECATRON™ PPS Polyphenylene sulfide (PPS)

Category	Polymer , Thermoplastic , Polyphenylene Sulfide (PPS)
Manufacturer	Ensinger
Trade Name	TECATRON™
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Ensinger TECATRON™ PPS Polyphenylene sulfide (PPS).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

TECATRON PPS is a high performance thermoplastic that combines good mechanical properties with excellent thermal and chemical resistance properties. There is no known solvent that dissolves TECATRON PPS at temperatures below 392°F. Its low ionic impurities make it an excellent choice for applications where high purity is a concern. TECATRON GF40 is a glass reinforced material that offers extremely high strength along with excellent chemical resistance properties. TECATRON PVX is a bearing grade PPS that is suitable for high load applications.Information Provided by Ensinger Industries, Inc.

Physical Properties	Metric	English	Comments
Specific Gravity	1.35 g/cc	1.35 g/cc	ASTM D792
Density	1.35 g/cc	0.0488 lb/in³	ASTM D792
Water Absorption at Saturation	0.020 % @Temperature 22.8 °C, Time 86400 sec	0.020 % @Temperature 73.0 °F, Time 24.0 hour	ASTM D570

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell M	104	104	ASTM D785
Tensile Strength, Yield	60.0 MPa @Temperature 22.8 °C	8700 psi @Temperature 73.0 °F	ASTM D638
Elongation at Break	4.0 % @Temperature 22.8 °C	4.0 % @Temperature 73.0 °F	ASTM D638
Tensile Modulus	3.31 GPa	480 ksi	ASTM D638
Flexural Strength	120 MPa @Temperature 22.8 °C	17400 psi @Temperature 73.0 °F	ASTM D790
Flexural Modulus	3.00 GPa @Temperature 22.8 °C	435 ksi @Temperature 73.0 °F	ASTM D790
Izod Impact, Notched	0.267 J/cm @Temperature 22.8 °C	0.500 ft-lb/in @Temperature 73.0 °F	ASTM D256
Coefficient of Friction, Dynamic	0.24 @Pressure 0.276 MPa	0.24 @Pressure 40.0 psi	50 fpm; ASTM D3702
K Factor (Wear Factor)	5.4e-8 @Pressure 0.276 MPa	5.4e-8 @Pressure 40.0 psi	(in<sup>3</sup>/hr)x(1/PV), 50 fpm, Against Steel; ASTM D3702

Thermal Properties	Metric	English	Comments
CTE, linear	72.0 µm/m-°C	40.0 µin/in-°F	ASTM D696
Thermal Conductivity	0.300 W/m-K	2.08 BTU-in/hr-ft²-°F
Melting Point	282 °C	540 °F	ASTM D2133
Maximum Service Temperature, Air	170 °C	338 °F	Long Term
Deflection Temperature at 0.46 MPa (66 psi)	204 °C	400 °F	ASTM D648
Deflection Temperature at 1.8 MPa (264 psi)	104 °C	220 °F	ASTM D648
Flammability, UL94	V-0	V-0

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+15 ohm-cm	1.00e+15 ohm-cm	ASTM D257
Dielectric Constant	3.0 @Frequency 60.0 Hz, Temperature 22.8 °C	3.0 @Frequency 60.0 Hz, Temperature 73.0 °F	50% RH; ASTM D150
Dissipation Factor	0.00010 @Frequency 60.0 Hz, Temperature 22.8 °C	0.00010 @Frequency 60.0 Hz, Temperature 73.0 °F	ASTM D150

Users viewing this material also viewed the following: