POLYMER SEARCH

EMS-Grivory Grivory® LVX-50H nat PA12-GF50

Category	Polymer , Thermoplastic , Nylon , Nylon 12 , Nylon 12, 50% Glass Fiber Filled
Manufacturer	EMS-Grivory (EMS-CHEMIE)
Trade Name	Grivory®
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	EMS-Grivory Grivory® LVX-50H nat PA12-GF50.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Product description: Grilamid LVX-50H natural is a 50% glass fiber reinforced, heat stabilized polyamide 12. Special characteristics of this injection molding product are: Very high stiffness and strengthExcellent impact and notched impact strengthExcellent UV, heat and chemical resistanceVery low moisture absorptionSuitable for repeated steam sterilizationGood flow characteristicsHigh molding precision, low warpage Grilamid LVX-50H natural is especially suitable for complex structural parts in applications such as: Electronic devicesAutomotiveMechanical engineeringSafety componentsMedical devices and instrumentsSports & leisure goodsInformation provided by EMS Grivory

Physical Properties	Metric	English	Comments
Density	1.47 g/cc	0.0531 lb/in³	ISO 1183
Water Absorption	0.80 %	0.80 %	ISO 62
Moisture Absorption	0.400 %	0.400 %	ISO 62
Linear Mold Shrinkage, Flow	0.0010 cm/cm	0.0010 in/in	ISO 294-4, 2577
Linear Mold Shrinkage, Transverse	0.0040 cm/cm	0.0040 in/in	ISO 294-4, 2577

Mechanical Properties	Metric	English	Comments
Tensile Strength at Break	145 MPa	21000 psi	conditioned; ISO 527-1/-2
Elongation at Break	3.5 %	3.5 %	conditioned; ISO 527-1/-2
Tensile Modulus	12.0 GPa	1740 ksi	conditioned; ISO 527-1/-2
Charpy Impact Unnotched	8.50 J/cm²	40.4 ft-lb/in²	conditioned; ISO 179/1eU
	8.50 J/cm² @Temperature 30.0 °C	40.4 ft-lb/in² @Temperature 86.0 °F	conditioned; ISO 179/1eU
Charpy Impact, Notched	2.50 J/cm²	11.9 ft-lb/in²	conditioned; ISO 179/1eA
	2.00 J/cm² @Temperature 30.0 °C	9.52 ft-lb/in² @Temperature 86.0 °F	conditioned; ISO 179/1eU

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	15.0 µm/m-°C	8.33 µin/in-°F	ISO 11359-1/-2
CTE, linear, Transverse to Flow	90.0 µm/m-°C	50.0 µin/in-°F	ISO 11359-1/-2
Melting Point	178 °C	352 °F	10°C/min; ISO 11357-1/-3
Maximum Service Temperature, Air	90.0 - 120 °C	194 - 248 °F	long term; EMS
	150 °C	302 °F	short term; EMS
Deflection Temperature at 1.8 MPa (264 psi)	170 °C	338 °F	ISO 75-1/-2
Deflection Temperature at 8.0 MPa	130 °C	266 °F	ISO 75-1/-2
Flammability, UL94	HB	HB	IEC 60695-11-10

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+13 ohm-cm	1.00e+13 ohm-cm	conditioned; IEC 60093
Surface Resistance	1.00e+12 ohm	1.00e+12 ohm	IEC 60093
Dielectric Strength	55.0 kV/mm	1400 kV/in	conditioned; IEC 60243-1
Comparative Tracking Index	600 V	600 V	conditioned; IEC 60112

Descriptive Properties	Value	Comments
Automotive	Automotive electr. and electronics, lighting
	Compressed air systems
	Exterior
	Fuel systems
	Hydraulic systems
	Interior
	Powertrain and Chassis
Electricals & Electronics	Connectors
	Electrical appliances
	Electrical equipment
	Lighting
	Mobile phones and other portable devices
Form	Granules
Industry & Consumer goods	Housewares
	Hydraulics & Pneumatics
	Mechanical Engineering
	Medical devices
	Power transmission
	Sports & Leisure
	Tools & Accessories
Processing	Injection Molding
Product Attributes	Improved flowability and demoulding
Special Characteristics	High impact or impact modified
	Improved heat resistance
	Improved UV resistance (outdoor use)

Users viewing this material also viewed the following: