EMS-Grivory Grivory® GV XE 16102 (GVL-6H HP) PA*-GF60

Category	Polymer , Thermoplastic , Nylon
Manufacturer	EMS-Grivory (EMS-CHEMIE)
Trade Name	Grivory®
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	EMS-Grivory Grivory® GV XE 16102 (GVL-6H HP) PA*-GF60.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Product description: Grivory XE 16102 natural is based on a combination of a heat stabilized semi-crystalline Polyamide with a partially aromatic Polyamide and 60% long special glass fibers. Grivory XE 16102 natural is characterized by the following key-properties: high stiffness and increased strength even after conditioning and over a wide temperature rangefurther enhanced notched impact resistance also at low temperatures compared to GVL-6Hlow creephigh heat distortion temperatureslow moisture absorptionvery good dimensional stability and little warpage The product has been designed for injection molding of technical parts especially in the area of die-cast metal replacement. Grivory XE 16102 natural is used in the following market segments: automotive The glass-fibers are aligned in parallel and are just as long as the pellets (usually 10 mm).Information provided by EMS Grivory

Physical Properties	Metric	English	Comments
Density	1.69 g/cc	0.0611 lb/in³	ISO 1183
Water Absorption	3.5 %	3.5 %	ISO 62
Moisture Absorption	1.20 %	1.20 %	ISO 62
Linear Mold Shrinkage, Flow	0.0010 cm/cm	0.0010 in/in	ISO 294-4, 2577
Linear Mold Shrinkage, Transverse	0.0020 cm/cm	0.0020 in/in	ISO 294-4, 2577

Mechanical Properties	Metric	English	Comments
Ball Indentation Hardness	320 MPa	46400 psi	conditioned; ISO 2039-1
	360 MPa	52200 psi	dry; ISO 2039-1
Tensile Strength at Break	275 MPa	39900 psi	conditioned; ISO 527-1/-2
	315 MPa	45700 psi	dry; ISO 527-1/-2
Elongation at Break	2.2 %	2.2 %	dry; ISO 527-1/-2
	2.3 %	2.3 %	conditioned; ISO 527-1/-2
Tensile Modulus	21.5 GPa	3120 ksi	conditioned; ISO 527-1/-2
	23.5 GPa	3410 ksi	dry; ISO 527-1/-2
Charpy Impact Unnotched	12.0 J/cm²	57.1 ft-lb/in²	conditioned; ISO 179/1eU
	12.5 J/cm²	59.5 ft-lb/in²	dry; ISO 179/1eU
	11.0 J/cm² @Temperature 30.0 °C	52.3 ft-lb/in² @Temperature 86.0 °F	dry; ISO 179/1eU
	11.0 J/cm² @Temperature 30.0 °C	52.3 ft-lb/in² @Temperature 86.0 °F	conditioned; ISO 179/1eU
Charpy Impact, Notched	4.50 J/cm²	21.4 ft-lb/in²	dry; ISO 179/1eA
	4.50 J/cm²	21.4 ft-lb/in²	conditioned; ISO 179/1eA
	4.50 J/cm² @Temperature 30.0 °C	21.4 ft-lb/in² @Temperature 86.0 °F	dry; ISO 179/1eU
	4.50 J/cm² @Temperature 30.0 °C	21.4 ft-lb/in² @Temperature 86.0 °F	conditioned; ISO 179/1eU

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	15.0 µm/m-°C	8.33 µin/in-°F	ISO 11359-1/-2
CTE, linear, Transverse to Flow	40.0 µm/m-°C	22.2 µin/in-°F	ISO 11359-1/-2
Melting Point	260 °C	500 °F	10°C/min; ISO 11357-1/-3
Maximum Service Temperature, Air	100 - 120 °C	212 - 248 °F	long term; EMS
	220 °C	428 °F	short term; EMS
Deflection Temperature at 1.8 MPa (264 psi)	255 °C	491 °F	ISO 75-1/-2
Deflection Temperature at 8.0 MPa	230 °C	446 °F	ISO 75-1/-2
Flammability, UL94	HB	HB	IEC 60695-11-10

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+12 ohm-cm	1.00e+12 ohm-cm	dry; IEC 60093
	1.00e+12 ohm-cm	1.00e+12 ohm-cm	conditioned; IEC 60093
Surface Resistance	1.00e+13 ohm	1.00e+13 ohm	IEC 60093
Dielectric Strength	33.0 kV/mm	838 kV/in	dry; IEC 60243-1
	33.0 kV/mm	838 kV/in	conditioned; IEC 60243-1
Comparative Tracking Index	600 V	600 V	conditioned; IEC 60112

Descriptive Properties	Value	Comments
Automotive	Automotive electr. and electronics, lighting
	Cooling and climate control
	Exterior
	Interior
	Powertrain and Chassis
Electricals & Electronics	Connectors
	Electrical appliances
	Electrical equipment
	Energy distribution
Form	Granules
Industry & Consumer goods	Housewares
	Hydraulics & Pneumatics
	Mechanical Engineering
	Power transmission
	Sports & Leisure
	Tools & Accessories
Processing	Injection Molding
Product Attributes	Improved flowability and demoulding
	Long Fiber Reinforced
	Partially aromatic Polyamide
Special Characteristics	Improved heat resistance

Users viewing this material also viewed the following: