- HOME
- POLYMER SEARCH
- Thermoplastic
- Nylon
- Nylon 66
- Nylon 66, 50% Glass Fiber Filled
- E-Polymers TEKAMID® TA250G45 , 45% Glass Fiber Reinforced PA66, DAM
E-Polymers TEKAMID® TA250G45 , 45% Glass Fiber Reinforced PA66, DAM
| Category | Polymer , Thermoplastic , Nylon , Nylon 66 , Nylon 66, 50% Glass Fiber Filled |
| Manufacturer | E-Polymers Co. Ltd. |
| Trade Name | TEKAMID® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | E-Polymers TEKAMID® TA250G45 , 45% Glass Fiber Reinforced PA66, DAM.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
45% Glass Fiber Reinforced, Good surfaceInformation provided by E-Polymers Co. Ltd.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.50 g/cc | 0.0542 lb/in³ | ASTM D792 |
| Water Absorption | 0.50 % | 0.50 % | 23°C/24 hr; ASTM D570 |
| Linear Mold Shrinkage | 0.0020 cm/cm | 0.0020 in/in |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell R | 123 | 123 | ASTM D786 |
| Tensile Strength, Yield | 230 MPa | 33400 psi | ASTM D638 |
| Elongation at Break | 2.0 % | 2.0 % | ASTM D638 |
| Flexural Yield Strength | 310 MPa | 45000 psi | ASTM D790 |
| Flexural Modulus | 13.0 GPa | 1890 ksi | ASTM D790 |
| Izod Impact, Notched | 1.50 J/cm | 2.81 ft-lb/in | ASTM D256 |
| Izod Impact, Unnotched | 70.0 J/cm @Thickness 3.20 mm |
131 ft-lb/in @Thickness 0.126 in |
ASTM D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 20.0 - 30.0 µm/m-°C @Temperature 20.0 °C |
11.1 - 16.7 µin/in-°F @Temperature 68.0 °F |
ASTM D696 |
| Melting Point | 260 °C | 500 °F | ASTM D2133 |
| Deflection Temperature at 0.46 MPa (66 psi) | 260 °C | 500 °F | ASTM D648 |
| Deflection Temperature at 1.8 MPa (264 psi) | 260 °C | 500 °F | ASTM D648 |
| Flammability, UL94 | HB | HB |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Arc Resistance | 110 sec | 110 sec | Tungsten electrode; ASTM D495 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Processing Temperature | 280 - 310 °C | 536 - 590 °F | |
| Mold Temperature | 90.0 - 120 °C | 194 - 248 °F |
Users viewing this material also viewed the following:
- Lubrizol Advanced Materials Pearlstick® D40-70/18 Linear Thermoplastic Polyurethane
- SABIC Innovative Plastics Xenoy® IQ1103U PBT+PC (Europe-Africa-Middle East)
- SABIC Innovative Plastics LNP THERMOCOMP RF005 PA 66
- A. Schulman SCHULAMID® 6 GF15H 15% Glass Fiber Reinforced, Heat Impact Nylon 6
- Formosa Plastics Formolene® 6501A Blow Molding and Injection Molding Polypropylene
- ExxonMobil Mobilarma 777
- BASF Ultramid® 8234G HS 44% Glass Filled PA6 (Dry)
- Ashley Polymers Ashlene® 829LF Nylon 6
- Teknor Apex APEX® 04-A0386B-88 Polyvinyl Chloride, Flexible
- Overview of materials for Nylon 6, MoS2 Filled
Copyright © lookpolymers.com All Rights Reserved