DuPont Performance Polymers Zytel® 330 NC010 Nylon (Unverified Data**)

Category	Polymer , Thermoplastic , Nylon
Manufacturer	DuPont Performance Polymers
Trade Name	Zytel®
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	DuPont Performance Polymers Zytel® 330 NC010 Nylon (Unverified Data**).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Unreinforced PolyamideZytel 330 NC010 is a transparent polyamide resin with amorphous characteristics.Information provided by DuPont Performance Polymers

Physical Properties	Metric	English	Comments
Density	1.18 g/cc	0.0426 lb/in³	DAM; ISO 1183
Water Absorption	5.8 % @Thickness 2.00 mm	5.8 % @Thickness 0.0787 in	DAM; Sim. to ISO 62
Viscosity	44000 cP @Shear Rate 5000 1/s, Temperature 320 °C	44000 cP @Shear Rate 5000 1/s, Temperature 608 °F	ISO 11403-1 -2
	70000 cP @Shear Rate 500 1/s, Temperature 320 °C	70000 cP @Shear Rate 500 1/s, Temperature 608 °F	ISO 11403-1 -2
	72000 cP @Shear Rate 5000 1/s, Temperature 300 °C	72000 cP @Shear Rate 5000 1/s, Temperature 572 °F	ISO 11403-1 -2
	122000 cP @Shear Rate 5000 1/s, Temperature 280 °C	122000 cP @Shear Rate 5000 1/s, Temperature 536 °F	ISO 11403-1 -2
	127000 cP @Shear Rate 500 1/s, Temperature 300 °C	127000 cP @Shear Rate 500 1/s, Temperature 572 °F	ISO 11403-1 -2
	243000 cP @Shear Rate 500 1/s, Temperature 280 °C	243000 cP @Shear Rate 500 1/s, Temperature 536 °F	ISO 11403-1 -2
Viscosity Test	80 cm³/g	80 cm³/g	DAM; ISO 307 1157 1628
Linear Mold Shrinkage, Flow	0.0050 cm/cm	0.0050 in/in	DAM; ISO 294-4 2577
Linear Mold Shrinkage, Transverse	0.0040 cm/cm	0.0040 in/in	DAM; ISO 294-4 2577

Mechanical Properties	Metric	English	Comments
Tensile Strength, Yield	97.0 MPa	14100 psi	DAM; ISO 527-1/-2
Elongation at Break	>= 50 %	>= 50 %	DAM; Nominal; ISO 527-1/-2
Elongation at Yield	6.0 %	6.0 %	DAM; ISO 527-1/-2
Tensile Modulus	1.30 GPa	189 ksi	50%RH; ISO 527-1/-2
	2.40 GPa	348 ksi	DAM; ISO 527-1/-2
	0.000701 GPa @Temperature 170 °C	0.102 ksi @Temperature 338 °F	50%RH; Dynamic; ISO 11403-1 -2
	0.00208 GPa @Temperature 170 °C	0.302 ksi @Temperature 338 °F	DAM; Dynamic; ISO 11403-1 -2
	0.0387 GPa @Temperature 110 °C	5.61 ksi @Temperature 230 °F	50%RH; Dynamic; ISO 11403-1 -2
	1.27 GPa @Temperature 30.0 °C	184 ksi @Temperature 86.0 °F	50%RH; Dynamic; ISO 11403-1 -2
	1.40 GPa @Temperature -20.0 °C	202 ksi @Temperature -4.00 °F	50%RH; Dynamic; ISO 11403-1 -2
	1.4027 GPa @Temperature 110 °C	203.44 ksi @Temperature 230 °F	DAM; Dynamic; ISO 11403-1 -2
	1.58 GPa @Temperature 30.0 °C	230 ksi @Temperature 86.0 °F	DAM; Dynamic; ISO 11403-1 -2
	1.70 GPa @Temperature -70.0 °C	246 ksi @Temperature -94.0 °F	50%RH; Dynamic; ISO 11403-1 -2
	1.72 GPa @Temperature -20.0 °C	250 ksi @Temperature -4.00 °F	DAM; Dynamic; ISO 11403-1 -2
	1.96 GPa @Temperature -100 °C	284 ksi @Temperature -148 °F	50%RH; Dynamic; ISO 11403-1 -2
	2.06 GPa @Temperature -70.0 °C	299 ksi @Temperature -94.0 °F	DAM; Dynamic; ISO 11403-1 -2
	2.24 GPa @Temperature -100 °C	325 ksi @Temperature -148 °F	DAM; Dynamic; ISO 11403-1 -2
Izod Impact, Notched (ISO)	8.00 kJ/m²	3.81 ft-lb/in²	DAM; ISO 180/1A
Charpy Impact Unnotched	18.0 J/cm²	85.7 ft-lb/in²	DAM; ISO 179/1eU
	NB	NB	50%RH; ISO 179/1eU
	18.0 J/cm² @Temperature -30.0 °C	85.7 ft-lb/in² @Temperature -22.0 °F	DAM; ISO 179/1eU
	23.0 J/cm² @Temperature -40.0 °C	109 ft-lb/in² @Temperature -40.0 °F	DAM; ISO 179/1eU
Charpy Impact, Notched	0.990 J/cm²	4.71 ft-lb/in²	DAM; ISO 179/1eA
	1.20 J/cm²	5.71 ft-lb/in²	50%RH; ISO 179/1eA
	0.450 J/cm² @Temperature -30.0 °C	2.14 ft-lb/in² @Temperature -22.0 °F	DAM; ISO 179/1eA
	0.450 J/cm² @Temperature -40.0 °C	2.14 ft-lb/in² @Temperature -40.0 °F	DAM; ISO 179/1eA
Puncture Energy	37.0 J @Load 377 kg	27.3 ft-lb @Load 832 lb	50%RH; ISO 6603-2
	70.0 J @Load 561 kg	51.6 ft-lb @Load 1240 lb	DAM; ISO 6603-2
	19.0 J @Load 316 kg, Temperature -30.0 °C	14.0 ft-lb @Load 697 lb, Temperature -22.0 °F	50%RH; ISO 6603-2
	47.0 J @Load 438 kg, Temperature -30.0 °C	34.7 ft-lb @Load 967 lb, Temperature -22.0 °F	DAM; ISO 6603-2

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	62.0 µm/m-°C	34.4 µin/in-°F	DAM; ISO 11359-1/-2
CTE, linear, Transverse to Flow	60.0 µm/m-°C	33.3 µin/in-°F	DAM; ISO 11359-1/-2
Specific Heat Capacity	2.46 J/g-°C	0.588 BTU/lb-°F
Thermal Conductivity	0.220 W/m-K	1.53 BTU-in/hr-ft²-°F	of melt
Deflection Temperature at 0.46 MPa (66 psi)	127 °C	261 °F	DAM; ISO 75-1/-2
Deflection Temperature at 1.8 MPa (264 psi)	123 °C	253 °F	DAM; ISO 75-1/-2
Glass Transition Temp, Tg	140 °C	284 °F	DAM; 10°C/min; ISO 11357-1/-2
Flammability, UL94	HB @Thickness 1.50 mm	HB @Thickness 0.0591 in	DAM; IEC 60695-11-10
	V-2 @Thickness 0.900 mm	V-2 @Thickness 0.0354 in	DAM; IEC 60695-11-10

Optical Properties	Metric	English	Comments
Transmission, Visible	88 %	88 %	ISO 13468-1 -2

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+15 ohm-cm	1.00e+15 ohm-cm	DAM; IEC 60093
	1.00e+15 ohm-cm	1.00e+15 ohm-cm	50%RH; IEC 60093
Dielectric Constant	3.7 @Frequency 1.00e+6 Hz	3.7 @Frequency 1.00e+6 Hz	DAM; IEC 60250
	3.8 @Frequency 1.00e+6 Hz	3.8 @Frequency 1.00e+6 Hz	50%RH; IEC 60250
	4.1 @Frequency 100 Hz	4.1 @Frequency 100 Hz	DAM; IEC 60250
	4.3 @Frequency 100 Hz	4.3 @Frequency 100 Hz	50%RH; IEC 60250
Dielectric Strength	28.0 kV/mm	711 kV/in	50%RH; IEC 60243-1
	29.0 kV/mm	737 kV/in	DAM; IEC 60243-1
Dissipation Factor	0.020 @Frequency 100 Hz	0.020 @Frequency 100 Hz	DAM; IEC 60250
	0.020 @Frequency 100 Hz	0.020 @Frequency 100 Hz	50%RH; IEC 60250
	0.020 @Frequency 1.00e+6 Hz	0.020 @Frequency 1.00e+6 Hz	DAM; IEC 60250
	0.020 @Frequency 1.00e+6 Hz	0.020 @Frequency 1.00e+6 Hz	50%RH; IEC 60250
Comparative Tracking Index	600 V	600 V	DAM; IEC 60112

Descriptive Properties	Value	Comments
Delivery Form	Pellets
Part Marking Code	>PA<	ISO 11469
Processing	Injection Moulding
Regional Availability	Europe
	Near East/Africa
	North America
	South and Central America
Resin Identification	PA
Special Characteristics	Heat stabilised or stable to heat
	Transparent

Users viewing this material also viewed the following: