DuPont Performance Polymers Crastin® FGS600F40 NC010 Polybutylene Terephthalate (PBT) (Unverified Data**)

Category	Polymer , Thermoplastic , Polyester, TP , Polybutylene Terephthalate (PBT)
Manufacturer	DuPont Performance Polymers
Trade Name	Crastin®
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	DuPont Performance Polymers Crastin® FGS600F40 NC010 Polybutylene Terephthalate (PBT) (Unverified Data**).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Unreinforced Low Viscosity Polybutylene Terephthalate Developed for Food Contact Applications Crastin FGS600F40 NC010 is an unreinforced low viscosity polybutylene terephthalate resin for injection molding. It has been developed for consideration intoInformation provided by DuPont Performance Polymers

Physical Properties	Metric	English	Comments
Density	1.11 g/cc	0.0401 lb/in³
	1.31 g/cc	0.0473 lb/in³	ISO 1183
Water Absorption	0.40 % @Thickness 2.00 mm	0.40 % @Thickness 0.0787 in	Sim. to ISO 62
Moisture Absorption	0.200 % @Thickness 2.00 mm	0.200 % @Thickness 0.0787 in	Sim. to ISO 62
Viscosity Test	120 cm³/g	120 cm³/g	ISO 307 1157 1628
Linear Mold Shrinkage, Flow	0.019 cm/cm	0.019 in/in	ISO 294-4 2577
Linear Mold Shrinkage, Transverse	0.018 cm/cm	0.018 in/in	ISO 294-4 2577
Melt Flow	33 g/10 min @Load 2.16 kg, Temperature 250 °C	33 g/10 min @Load 4.76 lb, Temperature 482 °F	ISO 1133

Mechanical Properties	Metric	English	Comments
Tensile Strength, Yield	58.0 MPa	8410 psi	ISO 527-1/-2
Elongation at Break	30 %	30 %	Nominal; ISO 527-1/-2
Elongation at Yield	6.0 %	6.0 %	ISO 527-1/-2
Tensile Modulus	2.60 GPa	377 ksi	ISO 527-1/-2
Flexural Strength	85.0 MPa	12300 psi	ISO 178
Flexural Modulus	2.40 GPa	348 ksi	ISO 178
Izod Impact, Notched (ISO)	4.00 kJ/m²	1.90 ft-lb/in²	ISO 180/1A
Charpy Impact Unnotched	NB	NB	ISO 179/1eU
	NB @Temperature -30.0 °C	NB @Temperature -22.0 °F	ISO 179/1eU
Charpy Impact, Notched	0.400 J/cm²	1.90 ft-lb/in²	ISO 179/1eA
	0.400 J/cm² @Temperature -30.0 °C	1.90 ft-lb/in² @Temperature -22.0 °F	ISO 179/1eA
Tensile Creep Modulus, 1 hour	2600 MPa @Time 3600 sec	377000 psi @Time 1.00 hour	ISO 899-1
Tensile Creep Modulus, 1000 hours	1800 MPa @Time 3.60e+6 sec	261000 psi @Time 1000 hour	ISO 899-1

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	110 µm/m-°C	61.1 µin/in-°F	ISO 11359-1/-2
CTE, linear, Transverse to Flow	120 µm/m-°C	66.7 µin/in-°F	ISO 11359-1/-2
Specific Heat Capacity	2.11 J/g-°C	0.504 BTU/lb-°F
Thermal Conductivity	0.210 W/m-K	1.46 BTU-in/hr-ft²-°F	of melt
Melting Point	225 °C	437 °F	10°C/min; ISO 11357-1/-3
Deflection Temperature at 0.46 MPa (66 psi)	115 °C	239 °F	ISO 75-1/-2
	180 °C	356 °F	annealed; ISO 75-1/-2
Deflection Temperature at 1.8 MPa (264 psi)	50.0 °C	122 °F	ISO 75-1/-2
	60.0 °C	140 °F	annealed; ISO 75-1/-2
Vicat Softening Point	175 °C	347 °F	50°C/h 50N; ISO 306
Glass Transition Temp, Tg	55.0 °C	131 °F	10°C/min; ISO 11357-1/-2
Flammability, UL94	HB @Thickness 1.50 mm	HB @Thickness 0.0591 in	IEC 60695-11-10
	HB @Thickness 0.800 mm	HB @Thickness 0.0315 in	IEC 60695-11-10
Oxygen Index	22 %	22 %	ISO 4589-1/-2

Electrical Properties	Metric	English	Comments
Volume Resistivity	>= 1.00e+15 ohm-cm	>= 1.00e+15 ohm-cm	IEC 60093
Surface Resistance	1.00e+12 ohm	1.00e+12 ohm	IEC 60093
Dielectric Strength	26.0 kV/mm	660 kV/in	IEC 60243-1
Dissipation Factor	0.0020 @Frequency 100 Hz	0.0020 @Frequency 100 Hz	IEC 60250
	0.020 @Frequency 1.00e+6 Hz	0.020 @Frequency 1.00e+6 Hz	IEC 60250
Comparative Tracking Index	600 V	600 V	IEC 60112

Descriptive Properties	Value	Comments
Delivery Form	Pellets
Part Marking Code	>PBT<	ISO 11469
Processing	Injection Moulding
Regional Availability	Asia Pacific
	Europe
	Global
	Near East/Africa
	North America
	South and Central America
Resin Identification	PBT

Users viewing this material also viewed the following: