- HOME
- POLYMER SEARCH
- Adhesive
- Dow Corning FLUOROGEL® 4-8022
Dow Corning FLUOROGEL® 4-8022
| Category | Polymer , Adhesive , Thermoset , Silicone |
| Manufacturer | Dow Corning |
| Trade Name | FLUOROGEL® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Dow Corning FLUOROGEL® 4-8022.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
One-part, translucent, heat cure, UV indicator, fuel and solvent resistant.Information provided by Dow Corning
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.22 g/cc @Temperature 25.0 °C |
1.22 g/cc @Temperature 77.0 °F |
|
| Viscosity | 700 cP | 700 cP | dynamic |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Penetration P(0), 1/10 mm | 110 | 110 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 540 µm/m-°C | 300 µin/in-°F | |
| Maximum Service Temperature, Air | 150 °C | 302 °F | |
| Minimum Service Temperature, Air | -70.0 °C | -94.0 °F |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.20e+12 ohm-cm | 1.20e+12 ohm-cm | |
| Dielectric Constant | 7.09 @Frequency 100 Hz |
7.09 @Frequency 100 Hz |
|
| 7.1 @Frequency 100000 Hz |
7.1 @Frequency 100000 Hz |
||
| Dielectric Strength | 14.8 kV/mm | 375 kV/in | |
| Dissipation Factor | 0.0030 @Frequency 100000 Hz |
0.0030 @Frequency 100000 Hz |
|
| 0.060 @Frequency 100 Hz |
0.060 @Frequency 100 Hz |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Shelf Life | 9.00 Month | 9.00 Month |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Appearance | translucent | |
| Flowable | yes | |
| Gel Hardness (Grams/Penetration) | 50 | |
| Hydrophobic | yes | |
| Self Leveling | yes | |
| Water Resistant | yes | |
| Working Time (min) | 43200 |
Users viewing this material also viewed the following:
- Eastman Aqua 18696 PET (discontinued **)
- Nilit FRIANYL B63 HS-GV30 Nylon 6 for injection molding, 30% glass fiber reinforced
- JPJ Technologies LLDPE Virgin for Masterbatches
- Solvay Technyl® C 206 Nylon 6, EH50
- Silikony Polskie Gumosil B Silicone Rubber
- Teknor Apex Sinvicomp SPF 4520 Polyvinyl Chloride, Flexible
- TSE Industries Millathane® 5004 Millable Polyurethane Elastomer with 3 PHR Varox DBPH-50
- Eurofoam Porocell POR 304 CM-BI EPDM Foam
- Aremco Pyro-Paint™ 634-BN (SC) High Temperature Refractory Coating
- Solvay RHODAPON® LS-92/RN Surfactant
Copyright © lookpolymers.com All Rights Reserved