- HOME
- POLYMER SEARCH
- Thermoplastic
- Nylon
- Nylon 46
- Nylon 46, Glass Fiber Reinforced
- DSM Stanyl® TW241F10 (COND) Nylon 46 50% Glass Reinforced, Heat Stabilized (North America)
DSM Stanyl® TW241F10 (COND) Nylon 46 50% Glass Reinforced, Heat Stabilized (North America)
| Category | Polymer , Thermoplastic , Nylon , Nylon 46 , Nylon 46, Glass Fiber Reinforced |
| Manufacturer | DSM Engineering Plastics |
| Trade Name | Stanyl® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | DSM Stanyl® TW241F10 (COND) Nylon 46 50% Glass Reinforced, Heat Stabilized (North America).pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Information provided by DSM Engineering Plastics.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.62 g/cc | 0.0585 lb/in³ | (DAM); ISO 1183 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength at Break | 160 MPa | 23200 psi | ISO 527-1/-2 |
| Elongation at Break | 5.0 % | 5.0 % | ISO 527-1/-2 |
| Tensile Modulus | 10.0 GPa | 1450 ksi | ISO 527-1/-2 |
| Charpy Impact Unnotched | 10.0 J/cm² | 47.6 ft-lb/in² | ISO 179/1eU |
| 8.00 J/cm² @Temperature -30.0 °C |
38.1 ft-lb/in² @Temperature -22.0 °F |
ISO 179/1eU | |
| Charpy Impact, Notched | 2.40 J/cm² | 11.4 ft-lb/in² | ISO 179/1eU |
| 1.40 J/cm² @Temperature -30.0 °C |
6.66 ft-lb/in² @Temperature -22.0 °F |
ISO 179/1eU |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Melting Point | 295 °C | 563 °F | (DAM); ISO 11357-1/-3 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.00e+8 ohm-cm | 1.00e+8 ohm-cm | IEC 60093 |
| Dielectric Strength | 20.0 kV/mm | 508 kV/in | IEC 60243-1 |
| Comparative Tracking Index | 300 V | 300 V | IEC 60112 |
Users viewing this material also viewed the following:
- Quantum Composites LYTEX® 4182 50-55% Carbon Fiber Reinforced Epoxy SMC
- Lehmann & Voss LUVOCOM® 1850/CF/15/TF/10/EM PBT, with carbon fiber, PTFE, easy flowing
- Ineos ABS Lustran® ABS 377 Plating, Injection Molding Grade
- Johnson Matthey Mattibraze 50 Cadmium Containing Silver Brazing Alloy
- STAR Thermoplastic Alloys & Rubbers StarFlex® P 7145-1000 TPE
- A. Schulman POLYPUR™ FPU 1377 Thermoplastic Polyurethane Compound
- Dow Corning MOLYKOTE® G-0103 GREASE
- Dow DOWLEX™ IP-10 High Density Polyethylene
- Overview of materials for Low Density Polyethylene (LDPE), Sheet/Profile extrusions
- Overview of materials for PBT + PET Blend, Glass Filled
Copyright © lookpolymers.com All Rights Reserved