- HOME
- POLYMER SEARCH
- Thermoplastic
- Nylon
- Nylon 6
- Nylon 6, 40% Glass Fiber Filled
- DSM Akulon® N24-G7 PA6-GF35
DSM Akulon® N24-G7 PA6-GF35
| Category | Polymer , Thermoplastic , Nylon , Nylon 6 , Nylon 6, 40% Glass Fiber Filled |
| Manufacturer | DSM Engineering Plastics |
| Trade Name | Akulon® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | DSM Akulon® N24-G7 PA6-GF35.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
35% Glass Reinforced
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.40 g/cc | 0.0506 lb/in³ | dry; ISO 1183 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Ultimate | 150 MPa | 21800 psi | dry; ISO 527-1/-2 |
| Elongation at Break | 2.1 % | 2.1 % | dry; ISO 527-1/-2 |
| Tensile Modulus | 11.3 GPa | 1640 ksi | dry; ISO 527-1/-2 |
| Charpy Impact Unnotched | 6.10 J/cm² @Temperature 23.0 °C |
29.0 ft-lb/in² @Temperature 73.4 °F |
dry; ISO 179/1eU |
| Charpy Impact, Notched | 1.10 J/cm² @Temperature 23.0 °C |
5.23 ft-lb/in² @Temperature 73.4 °F |
dry; ISO 179/1eA |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Melting Point | 220 °C | 428 °F | 10°C/min; ISO 11357-1/-3 |
Users viewing this material also viewed the following:
- Polimeri Europa Sinkral® E 332 ABS Resin
- Nilit FRIANYL A63 H-SG40 Nylon 6.6 for injection molding, 40% mineral filled
- MetalTek MTEK 825 Cast UNS N08826 Severe Corrosion and Heat Resistant Alloy
- Teknor Apex Monprene® MP-2830C CLR Thermoplastic Elastomer
- Formosa Plastics Formolene® 6510E Injection Molding Polypropylene
- ExxonMobil 375 NC Mobiltac
- Solvay TECHNYL® 1021GF6 PA6, 30% glass fiber, Conditioned
- Huntsman PE8020 Specialty Polyethylene (discontinued **)
Copyright © lookpolymers.com All Rights Reserved