Category | Polymer , Thermoplastic , Nylon , Nylon 6 , Nylon 6, Glass/Mineral Reinforced |
Manufacturer | DSM Engineering Plastics |
Trade Name | Akulon® |
Port | Ningbo port,China |
Trade Terms | FOB, CFR, CIF |
Payment Terms | L/C, T/T, Western Union |
Download PDF | DSM Akulon® K222-KGMV14 Nylon 6-25% Glass and Mineral Reinforced (European Grade) (Dry).pdf |
Price | EMAIL US sales@lookpolymers.com |
Physical Properties | Metric | English | Comments |
---|---|---|---|
Density | 1.36 g/cc | 0.0491 lb/in³ | ISO 1183 |
Water Absorption | 6.8 % | 6.8 % | Sim. to ISO 62 |
Moisture Absorption at Equilibrium | 2.0 % | 2.0 % | Humidity Absorption; Sim. to ISO 62 |
Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength at Break | 90.0 MPa | 13100 psi | ISO 527-1/-2 |
Elongation at Break | 2.5 % | 2.5 % | ISO 527-1/-2 |
Tensile Modulus | 7.00 GPa | 1020 ksi | ISO 527-1/-2 |
Charpy Impact Unnotched | 3.50 J/cm² @Temperature -30.0 °C |
16.7 ft-lb/in² @Temperature -22.0 °F |
ISO 179/1eU |
4.00 J/cm² @Temperature 23.0 °C |
19.0 ft-lb/in² @Temperature 73.4 °F |
ISO 179/1eU | |
Charpy Impact, Notched | 0.400 J/cm² @Temperature -30.0 °C |
1.90 ft-lb/in² @Temperature -22.0 °F |
ISO 179/1eA |
0.500 J/cm² @Temperature 23.0 °C |
2.38 ft-lb/in² @Temperature 73.4 °F |
ISO 179/1eA |
Thermal Properties | Metric | English | Comments |
---|---|---|---|
Melting Point | 220 °C | 428 °F | 10°C/min; ISO 11357-1/-3 |
Deflection Temperature at 0.46 MPa (66 psi) | 210 °C | 410 °F | ISO 75-1/-2 |
Deflection Temperature at 1.8 MPa (264 psi) | 170 °C | 338 °F | ISO 75-1/-2 |
UL RTI, Electrical | 65.0 °C @Thickness 1.50 mm |
149 °F @Thickness 0.0591 in |
UL746B |
65.0 °C @Thickness 0.750 mm |
149 °F @Thickness 0.0295 in |
UL746B | |
UL RTI, Mechanical with Impact | 65.0 °C @Thickness 0.750 mm |
149 °F @Thickness 0.0295 in |
UL746B |
65.0 °C @Thickness 1.50 mm |
149 °F @Thickness 0.0591 in |
UL746B | |
UL RTI, Mechanical without Impact | 65.0 °C @Thickness 1.50 mm |
149 °F @Thickness 0.0591 in |
UL746B |
65.0 °C @Thickness 0.750 mm |
149 °F @Thickness 0.0295 in |
UL746B | |
Flammability, UL94 | V-2 @Thickness 1.60 mm |
V-2 @Thickness 0.0630 in |
IEC 60695-11-10 |
V-2 @Thickness 0.750 mm |
V-2 @Thickness 0.0295 in |
IEC 60695-11-10 |
Electrical Properties | Metric | English | Comments |
---|---|---|---|
Volume Resistivity | 1.00e+15 ohm-cm | 1.00e+15 ohm-cm | IEC 60093 |
Dielectric Constant | 3.8 @Frequency 1e+6 Hz |
3.8 @Frequency 1e+6 Hz |
IEC 60250 |
4.2 @Frequency 100 Hz |
4.2 @Frequency 100 Hz |
IEC 60250 | |
Dielectric Strength | 30.0 kV/mm | 762 kV/in | IEC 60243-1 |
Dissipation Factor | 0.0090 @Frequency 100 Hz |
0.0090 @Frequency 100 Hz |
IEC 60250 |
0.019 @Frequency 1e+6 Hz |
0.019 @Frequency 1e+6 Hz |
IEC 60250 | |
Comparative Tracking Index | 475 V | 475 V | IEC 60112 |
Descriptive Properties | Value | Comments |
---|---|---|
Flame Retardant | Yes | |
Flame Retarding Agent | Yes | |
Heat stabilized or stable to heat | Yes | |
Injection molding | Yes | |
Release Agent | Yes | |
With Fillers | Yes |